[Dsg-ltcc] LTCC Solenoid Control
Marc McMullen
mcmullen at jlab.org
Thu Nov 8 08:06:42 EST 2018
Thanks Denny,
We will look into those.
Marc McMullen
Physics Division
Detector Support Group
7738
From: "Denny Insley" <dinsley at jlab.org>
To: "Marc McMullen" <mcmullen at jlab.org>
Sent: Thursday, November 8, 2018 7:07:04 AM
Subject: Re: [Dsg-ltcc] LTCC Solenoid Control
Good morning Marc,
Quick question, are the 120VAC coils you're referring to redhat solenoid valves?
I ask because if that is the case we have a substantial stock pile of those valves
in 98.
Denny
----- Original Message -----
From: "Marc McMullen" <mcmullen at jlab.org>
To: "dsg-ltcc" <dsg-ltcc at jlab.org>
Cc: "Todd Kujawa" <kujawa at jlab.org>, "Robert Miller" <rmiller at jlab.org>
Sent: Wednesday, November 7, 2018 5:41:20 PM
Subject: [Dsg-ltcc] LTCC Solenoid Control
Hi Bob,
We discussed the solenoid controls in our status meeting today and
decided that the best option would be to use the existing solenoids, but
change the coils to the low current 120VAC coils. We have also consulted
with Todd Kujawa to ensure cabling will be up to code.
The change will require a new chassis to distribute 120VAC supplied by
the UPS. We are procuring the components for this new chassis. Once the
chassis is complete and the 120V coils arrive, they can be installed
during an opening.
In the interim, we are modifying a relay chassis from the CLAS6 Hardware
Monitoring System. This chassis can be used to actuate the currently
installed 24VAC solenoid coils during standard operating pressures from
the controls software, just in case the C4F10 arrives before the new
equipment is installed.
I have attached a flow diagram, which I have extracted the controls
portion of your fault scheme. The logic for the control of the solenoids
and pumps will be programmed using this flow chart. Please review and
respond with any corrections needed.
Regards,
--
Marc McMullen
Detector Support Group
757-269-7738
_______________________________________________
Dsg-ltcc mailing list
Dsg-ltcc at jlab.org
https://mailman.jlab.org/mailman/listinfo/dsg-ltcc
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_ltcc/attachments/20181108/00eb110e/attachment-0002.html>
More information about the Dsg-ltcc
mailing list