[Dsg-hallb_magnets] Updates to DBox,- Torus PLCs

[Pablo Campero]

Hi Wesley, 

I have to add the correct IP address (129.57.96.30) that we have for the Solenoid in the D.Box and Torus PLCs, to make possible the communications between the PLCs. 


Pablo 

From: "Wesley Moore" <wmoore at jlab.org> 
To: "Pablo Campero" <campero at jlab.org> 
Cc: "dsg-hallb magnets" <dsg-hallb_magnets at jlab.org> 
Sent: Tuesday, December 20, 2016 8:24:48 AM 
Subject: Re: [Dsg-hallb_magnets] Updates to DBox,- Torus PLCs 

Pablo, 

Can you clarify what you mean by 'change the configurations'? 

Wesley 




From: "Pablo Campero" <campero at jlab.org> 
To: "dsg-hallb magnets" <dsg-hallb_magnets at jlab.org> 
Sent: Tuesday, December 20, 2016 8:18:19 AM 
Subject: [Dsg-hallb_magnets] Updates to DBox,- Torus PLCs 




BQ_BEGIN

Hello Ruben and Renuka; 

I need to download the new routine that I programmed to set the Interlocks valves (required by the Solenoid) into the the DBox PLC. 
In addition to this, is needed change the configurations for the IP Address for the DBox and Torus PLCs to be able to set the communication with the Solenoid PLC. 

Please let me know if I can go ahead with this updates for both PLCs (DBox and Torus). 

Best Regards 
Pablo Campero 


_______________________________________________ 
Dsg-hallb_magnets mailing list 
Dsg-hallb_magnets at jlab.org 
https://mailman.jlab.org/mailman/listinfo/dsg-hallb_magnets 
BQ_END


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_magnets/attachments/20161220/ebff6eac/attachment.html>