[Dsg-hallb_magnets] EPICS screen

[Pablo Campero]

Hello Wesley, 

Can you confirm if the spreadsheet attached will be the final PV names that we will use for the cooldown parameters. 
I saw that Dave made some modifications to the names. So please let me know if you are considering these, and then I can use these to change the PLC code as well. 

Best Regards 
Pablo 

From: "Renuka Rajput-Ghoshal" <renuka at jlab.org> 
To: "Wesley Moore" <wmoore at jlab.org> 
Cc: "Pablo Campero" <campero at jlab.org>, "Nicholas Sandoval" <sandoval at jlab.org>, "Ruben Fair" <rfair at jlab.org>, "Probir Ghoshal" <ghoshal at jlab.org> 
Sent: Thursday, February 9, 2017 4:39:38 PM 
Subject: Re: EPICS screen 

Hello Wesley, 
Thanks for updating the solenoid EPICS screens. 
There are still missing EPICS screen for the solenoid: 

1. For torus, there is a screen that shows the Cryocon status, similar screen is missing for the solenoid. 

2. Cooldown parameter screen is not there yet. 

3. Cooldown interlock screen is also not there. 
Pablo, could you please send the final version of cooldown parameter and interlock information to Wesley? 

4. About the MPS interlock screen, the solenoid screen is like the older version of torus MPS interlock screen. The solenoid MPS interlock screen should be changed to same as the torus screen is now. There will be some changes to that, I have tried to show the changes in the attached slide "proposed MPS interlock screen for solenoid_February 9th 2017.pptx". Could you please look at it and let me know if something is not clear. 
Nick and Pablo, could you also look at this and see if I have captured everything from the interlock parameter table. 

5. The Quench detection screen is not easy to understand as of now. Could you please change the name of the 2nd column to "Combination Voltage" instead of just "Voltage". Also could you please put a picture on that screen (as shown in attached "Voltage description for EPICS screen.pptx"). 

Please let me know estimated time frame to complete the above screens. 

Regards 
Renuka 




----- Original Message ----- 
From: "Wesley Moore" <wmoore at jlab.org> 
To: "Renuka Rajput-Ghoshal" <renuka at jlab.org> 
Sent: Thursday, February 9, 2017 10:48:19 AM 
Subject: Re: EPICS screen 

I’ve updated the databases and guis. Please check them now. 

Wesley 

> On Feb 8, 2017, at 4:14 PM, Renuka Rajput-Ghoshal <renuka at jlab.org> wrote: 
> 
> Thanks Wesley for adding up these two temperature sensors to the EPICS screen. 
> I was looking at "Solenoid Helium-Solenoid Temps" EPICS screen, under the tab radiation shield two instrument IDs are shown TP86135HS_DS_CO_xxx and TP86136HS_US_CO_xxx! 
> These should be TP86135HS_DS_CO_LBR and TP86136HS_US_CO_UBR. 
> 
> Could you please look at this and make the necessary changes. 
> Also, please add two additional Hall sensors on MPS EPICS screen. 
> 
> Please let me know when you are done with these changes. 
> 
> Thanks 
> Renuka 
> 
> 
> 
> ----- Original Message ----- 
> From: "Renuka Rajput-Ghoshal" <renuka at jlab.org> 
> To: "Wesley Moore" <wmoore at jlab.org> 
> Sent: Thursday, January 26, 2017 4:28:04 PM 
> Subject: EPICS screen 
> 
> Hello Wesley, 
> There are two more temperature sensors to be added to the solenoid EPICS screen, best place might be either SST temperature screen or MPS (I am not sure where these are for torus). 
> These are TP822A and TP8622B, these are mounted on the Water Cooled Leads (WCLs) at the power supply end. 
> 
> Could you please check that where they are for torus and do the same for solenoid. 
> 
> Thanks 
> Renuka 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_magnets/attachments/20170210/68898672/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Copy of Solenoid_PV_Tag_Names_20170119 dk temp.xlsx
Type: application/vnd.openxmlformats-officedocument.spreadsheetml.sheet
Size: 13896 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_magnets/attachments/20170210/68898672/attachment.xlsx>