[Dsg-hallb_magnets] Check IDCCT Torus_FastDAQ:I.Data[24]

[Tyler Lemon]

Nick, 

The corrections have been made. Can you confirm if you can see IDCCT1 now? Thanks. 

Tyler 



From: "Tyler Lemon" <tlemon at jlab.org> 
To: "dsg-hallb magnets" <dsg-hallb_magnets at jlab.org> 
Sent: Wednesday, January 25, 2017 3:51:30 PM 
Subject: Re: [Dsg-hallb_magnets] Check IDCCT Torus_FastDAQ:I.Data[24] 

Nick, 

It looks like somehow VT24-DAQ got removed from the cRIO. I will make the changes to correct this now. 

Deploying the changes will trip the Controlled Ramp Down interlock for Fast-Daq cRIO Comm but it will be able to be reset as communication is re-established. 

Best regards, 
Tyler 


From: "Nicholas Sandoval" <sandoval at jlab.org> 
To: "Tyler Lemon" <tlemon at jlab.org> 
Cc: "Probir Ghoshal" <ghoshal at jlab.org>, "Ruben Fair" <rfair at jlab.org> 
Sent: Wednesday, January 25, 2017 2:53:16 PM 
Subject: Check IDCCT Torus_FastDAQ:I.Data[24] 

Hi Tyler, 

IDCCT has not changed in the PLC since 12/13/16. Please double check that it is being sent to the PLC. 

It may correlate to software changes or updates that was performed on that date. 

Thank you, 

Nick 


_______________________________________________ 
Dsg-hallb_magnets mailing list 
Dsg-hallb_magnets at jlab.org 
https://mailman.jlab.org/mailman/listinfo/dsg-hallb_magnets 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_magnets/attachments/20170125/7b3c5757/attachment.html>