[Dsg-hallb_magnets] Solenoid PLC Off- Line

Probir Ghoshal ghoshal at jlab.org
Wed Jul 26 15:32:18 EDT 2017


Agreed with pablo and scot this morning to check the following in sequence - calibration, wiring and last is to open up the stem and check the seat.
Scot was there waiting till i left at 1435 hrs.
Please plan for the test tomorrow morning and please go ahead and carry out the test on SV for the vaporizer.

Regards

Probir

----- Original Message -----
From: "Brian Eng" <beng at jlab.org>
To: "Probir Ghoshal" <ghoshal at jlab.org>
Cc: "Ruben Fair" <rfair at jlab.org>, "dsg-hallb magnets" <dsg-hallb_magnets at jlab.org>
Sent: Wednesday, July 26, 2017 3:28:09 PM
Subject: Re: [Dsg-hallb_magnets] Solenoid PLC Off- Line

Pablo and I are in the Hall now.

Did the valve seats already get checked? I wasn't sure if we were going to the LVDT calibration today or tomorrow.

In the meantime we'll test the SV for the vaporizer.

----- Original Message -----
> From: "Probir Ghoshal" <ghoshal at jlab.org>
> To: "Brian Eng" <beng at jlab.org>
> Cc: "Ruben Fair" <rfair at jlab.org>, "dsg-hallb magnets" <dsg-hallb_magnets at jlab.org>
> Sent: Wednesday, July 26, 2017 1:08:01 PM
> Subject: Re: [Dsg-hallb_magnets] Solenoid PLC Off- Line

> I have no problem but Pablo is going to check with Scot valves and calibration
> and seal seat this afternoon.
> 
> Pablo could you please let Brian about the same. I am in a meeting from 1300 and
> could be there by 1415 hrs...!
> 
> Let me know.
> 
> Regards
> Probir
> 
> Sent from my iPhone
> 
>> On Jul 26, 2017, at 1:04 PM, Brian Eng <beng at jlab.org> wrote:
>> 
>> Probir,
>> 
>> Do you see any issues with taking the Solenoid PLC offline later today?
>> 
>> We're seeing some inconsistencies in how the RSLogix software is reporting the
>> TimeSync functionality with the Solenoid PLCs and unfortunately any changes
>> will probably need to be done offline.
>> 
>>> On Jul 25, 2017, at 3:16 PM, Ruben Fair <rfair at jlab.org> wrote:
>>> 
>>> Hi Pablo
>>> 
>>> Check with Probir but you should be able to take the Solenoid PLC ogg-line
>>> 
> >> Ruben


More information about the Dsg-hallb_magnets mailing list