[Dsg-hallb_magnets] Coil temperature from resistance measurements

[Pablo Campero]

Hello Ruben, 

Calculation to estimate temperature in the Coils 1 to 5 are completed, the calculation were implemented in the Solenoid PLC code and EPICS screen as well (See attached screenshot). Actual readout values are not the expected values, since we need to hook the Solenoid to read normal parameters that are involve the calculations for the estimate temperatures. 
Detailed information of this calculations and results can be found in the spreadsheet Standard Length_Solenoid_cond_for temp estimation_June 15th_ 2017_V1 in the next link: M:\hallb_eng\CLAS12\Magnets\Solenoid\Controls and Wiring. 

Best Regards, 
Pablo 




From: "Probir Ghoshal" <ghoshal at jlab.org> 
To: "Ruben Fair" <rfair at jlab.org> 
Cc: "Pablo Campero" <campero at jlab.org> 
Sent: Thursday, June 15, 2017 5:35:27 AM 
Subject: Re: Coil temperature from resistance measurements 

Hi Ruben, 
Pablo will send the details and the screen shot of the EPICS screen today (15th June). 
All completed but will test only after hooking up the magnet and MPS. 
Pablo - could please send the document as suggested and the location this morning. 

Regards 
Probir 

On Jun 14, 2017, at 3:35 PM, Ruben Fair < rfair at jlab.org > wrote: 




Probir, 

What was the outcome from your meeting today? 

Is the work now complete with EPICS screens updated? 

Regards 

Ruben 



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_magnets/attachments/20170615/13055013/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Solenoid Cooldown Parameters Screen.PNG
Type: image/png
Size: 46245 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_magnets/attachments/20170615/13055013/attachment-0001.png>