[Dsg-hallb_magnets] [New Logentry] Solenoid and Torus FastDAQ cRIOs cannot connect to network

[tlemon at jlab.org]

Logentry Text:
--
Both Torus and Solenoid FastDAQ cRIOs could not be connected to over the network. They could not be pinged or connected to in NI-MAX or the LabVIEW project file.

Both cRIOs have their "STATUS" LED on the cRIO constantly blinking yellow. From the NI manual, this means that there is an issue during boot or there is an unrecoverable software issue.

The Torus FastDAQ cRIO has been put into safe-mode and is able to be reached over the network while in safe mode. As soon as the cRIO is taken out of safe-mode, it loses its connection to the network again.

Troubleshooting of the error will continue. This log entry will be updated with any troubleshooting process.

---

This is a plain text email for clients that cannot display HTML.  The full logentry can be found online at https://logbooks.jlab.org/entry/3477321
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_magnets/attachments/20170627/0ebb4a21/attachment-0001.html>