[Dsg-hallb_magnets] Hall B Solenoid - Additional TP for new relief valve

[Tyler Lemon]

Ruben, 

What is the serial number for the new PT100? Also, is there a calibration curve for the sensor? 

Please let me know so I can update the LV cRIO program. 

Best regards, 
Tyler 


From: "Ruben Fair" <rfair at jlab.org> 
To: "Ramakrishna Bachimanchi" <bachiman at jlab.org> 
Cc: "Probir Ghoshal" <ghoshal at jlab.org>, "Pablo Campero Rojas" <campero at jlab.org>, "Tyler Lemon" <tlemon at jlab.org>, "Scot Spiegel" <spiegel at jlab.org> 
Sent: Monday, May 15, 2017 2:20:58 PM 
Subject: Fwd: Hall B Solenoid - Additional TP for new relief valve 

Hi Rama, 

Please see note below. 

We have to install an additional PT102. 

Can you provide a channel? 

Regards 

Ruben 


From: "Scot Spiegel" <spiegel at jlab.org> 
To: "Ruben Fair" <rfair at jlab.org>, "Pablo Campero Rojas" <campero at jlab.org>, "bachiman" <bachiman at jlab.org> 
Cc: "Probir Ghoshal" <ghoshal at jlab.org>, "Renuka Rajput-Ghoshal" <renuka at jlab.org>, "Krister Bruhwel" <bruhwel at jlab.org>, "Nicholas Sandoval" <sandoval at jlab.org> 
Sent: Monday, May 15, 2017 2:18:37 PM 
Subject: Re: Hall B Solenoid - Additional TP for new relief valve 

Gents, 

You cannot use any of the CRYOCON channels... as they are paired i.e. A-B, C-D etc. and already grouped together and not available for a single input. 

I talked with Probir and he said any LV Chassis channel will suffice. Rama just needs to I.D. an appropriate channel to use and it can be plugged in directly. 

This is the quickest and least disruptive to the already checked systems. I have already given Krister the 100' labeled (TP8680) cable. He needs the Mounting and PT-102's 

Feedback welcomed. 

Best regards, 

Scot Spiegel 
Sr. Technologist / Designer 
Physics / Hall D 
JSA Jefferson Lab 
12000 Jefferson Ave. 
Bldg. 55 Rm. 1546-24 
Newport News, VA. 23606 
Ph. 757-536-5900 
Wk. 757-269-5900 


From: "Ruben Fair" <rfair at jlab.org> 
To: "Tyler Lemon" <tlemon at jlab.org> 
Cc: "Joseph Matalevich" <josephm at jlab.org>, "Renuka Rajput-Ghoshal" <renuka at jlab.org>, "Krister Bruhwel" <bruhwel at jlab.org>, "Scot Spiegel" <spiegel at jlab.org>, "Pablo Campero" <campero at jlab.org>, "Wesley Moore" <wmoore at jlab.org> 
Sent: Monday, May 15, 2017 2:05:37 PM 
Subject: Re: Hall B Solenoid - Additional TP for new relief valve 

Tyler, Pablo. 

I suggest we use Cryocon unit 1, channel F for the new TP8680. 

Please work with Wesley to get the relevant EPICS screen updated once we have the updated P and ID from Joe. 

Ruben 



From: "Tyler Lemon" <tlemon at jlab.org> 
To: "Ruben Fair" <rfair at jlab.org>, "Joseph Matalevich" <josephm at jlab.org>, "Renuka Rajput-Ghoshal" <renuka at jlab.org>, "Krister Bruhwel" <bruhwel at jlab.org>, "Scot Spiegel" <spiegel at jlab.org>, "Pablo Campero Rojas" <campero at jlab.org>, "dsg-hallb magnets" <dsg-hallb_magnets at jlab.org> 
Sent: Monday, May 15, 2017 11:29:26 AM 
Subject: Re: Hall B Solenoid - Additional TP for new relief valve 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_magnets/attachments/20170516/d19f0d09/attachment-0001.html>