[Dsg-hallb_magnets] Hall B Solenoid - Additional TP for Vaporizer
Probir Ghoshal
ghoshal at jlab.org
Tue May 23 07:57:28 EDT 2017
Hi Tyler,
There are no extar sensors going into LV chassis.
The Master List is loacted at the following location.
M:\hallb_eng\CLAS12\Magnets\Solenoid\Controls and Wiring\Master Instrumentation_Lists_v33_May 19th_2017.xlsx
Regards
Probir
----- Original Message -----
From: "Tyler Lemon" <tlemon at jlab.org>
To: "Ramakrishna Bachimanchi" <bachiman at jlab.org>
Cc: "Pablo Campero" <campero at jlab.org>, "Ruben Fair" <rfair at jlab.org>, "Joseph Matalevich" <josephm at jlab.org>, "Probir Ghoshal" <ghoshal at jlab.org>, "Krister Bruhwel" <bruhwel at jlab.org>, "Scot Spiegel" <spiegel at jlab.org>, "dsg-hallb magnets" <dsg-hallb_magnets at jlab.org>
Sent: Tuesday, May 23, 2017 7:47:40 AM
Subject: Re: [Dsg-hallb_magnets] Hall B Solenoid - Additional TP for Vaporizer
Hello Rama,
Have you updated the LV Chassis "Master List" for the new PT100s for TP8680 (Relief) in Chassis 2, Channel J10 and for TP8675 (Vaporizer) in Chassis 2, Channel J11?
Please let me know where I can find the updated spreadsheet.
Best regards,
Tyler
From: "Scot Spiegel" <spiegel at jlab.org>
To: "Ramakrishna Bachimanchi" <bachiman at jlab.org>, "Pablo Campero" <campero at jlab.org>, "Tyler Lemon" <tlemon at jlab.org>
Cc: "Ruben Fair" <rfair at jlab.org>, "Joseph Matalevich" <josephm at jlab.org>, "Probir Ghoshal" <ghoshal at jlab.org>, "Krister Bruhwel" <bruhwel at jlab.org>
Sent: Thursday, May 18, 2017 9:09:12 AM
Subject: Fwd: [Dsg-hallb_magnets] Hall B Solenoid - Additional TP for Vaporizer
Rama,
Would you please update the LV Chassis "Master List" for the addition of TP8680 (Relief) Chassis 2 Channel J10 and TP8675 (Vaporizer) Chassis 2 Channel J11
Pablo/Tyler,
System program need to be updated to accommodate these new Temp. sensors (listed below) also.
Thanks,
Scot Spiegel
Sr. Technologist / Designer
Physics / Hall D
JSA Jefferson Lab
12000 Jefferson Ave.
Bldg. 55 Rm. 1546-24
Newport News, VA. 23606
Ph. 757-536-5900
Wk. 757-269-5900
From: "Scot Spiegel" <spiegel at jlab.org>
To: "Ruben Fair" <rfair at jlab.org>
Cc: "Krister Bruhwel" <bruhwel at jlab.org>, "Ramakrishna Bachimanchi" <bachiman at jlab.org>, "Probir Ghoshal" <ghoshal at jlab.org>, "Renuka Rajput-Ghoshal" <renuka at jlab.org>
Sent: Thursday, May 18, 2017 7:14:10 AM
Subject: Re: [Dsg-hallb_magnets] Hall B Solenoid - Additional TP for new relief valve
Ruben,
Just one "pair" = (1 + redundant) for vaporizer ~ TP8675.
Krister already has the pair for the "new" relief ~ TP8680.
I think Probir is providing it and giving it to Krister.
Thanks,
Scot Spiegel
Sr. Technologist / Designer
Physics / Hall D
JSA Jefferson Lab
12000 Jefferson Ave.
Bldg. 55 Rm. 1546-24
Newport News, VA. 23606
Ph. 757-536-5900
Wk. 757-269-5900
From: "Ruben Fair" <rfair at jlab.org>
To: "Krister Bruhwel" <bruhwel at jlab.org>, "Ramakrishna Bachimanchi" <bachiman at jlab.org>
Cc: "Probir Ghoshal" <ghoshal at jlab.org>, "Renuka Rajput-Ghoshal" <renuka at jlab.org>, "Scot Spiegel" <spiegel at jlab.org>
Sent: Wednesday, May 17, 2017 5:09:10 PM
Subject: Re: [Dsg-hallb_magnets] Hall B Solenoid - Additional TP for new relief valve
Rama,
Could you please update the master instrumentation list with this latest sensor?
And identify another two chassis channels for the additional two PT100 sensors that we will need for the vaporizer?
Scot,
Is it just two sensors we will need ? Or 4 (i.e. two redundant)?
Regards
Ruben
From: "Ruben Fair" <rfair at jlab.org>
To: "Krister Bruhwel" <bruhwel at jlab.org>
Cc: "dsg-hallb magnets" <dsg-hallb_magnets at jlab.org>, "bachiman" <bachiman at jlab.org>
Sent: Wednesday, May 17, 2017 5:07:00 PM
Subject: Re: [Dsg-hallb_magnets] Hall B Solenoid - Additional TP for new relief valve
Krister,
It seems that we might need another two PT100 sensors for the new vaporizer. Do we know who made the previous blocks?
Do we need the sensors themselves too?
Ruben
From: "Krister Bruhwel" <bruhwel at jlab.org>
To: "Tyler Lemon" <tlemon at jlab.org>
Cc: "Krister Bruhwel" <bruhwel at jlab.org>, "Probir Ghoshal" <ghoshal at jlab.org>, "Ruben Fair" <rfair at jlab.org>, "bachiman" <bachiman at jlab.org>, "Pablo Campero Rojas" <campero at jlab.org>, "Scot Spiegel" <spiegel at jlab.org>, "dsg-hallb magnets" <dsg-hallb_magnets at jlab.org>
Sent: Wednesday, May 17, 2017 2:17:42 PM
Subject: Re: Hall B Solenoid - Additional TP for new relief valve
Hello,
A new PT100 sensor is being added for TP8675. The numbers for it are
101 and 102. There aren't any more PT100 sensor blocks left so plan
on making more blocks if needed.
Thanks,
Krister
On Wed, May 17, 2017 at 09:45:55AM -0400, Tyler Lemon wrote:
> Hello,
> Seeing that there are two serial numbers, are there going to be two new
> PT100s added for the relief valve? Or is one of the sensors a redundant
> backup?
> Is there an updated Master Instrumentation spreadsheet showing the new
> PT100s?
> Best regards,
> Tyler
> __________________________________________________________________
>
> From: "Krister Bruhwel" <bruhwel at jlab.org>
> To: "Probir Ghoshal" <ghoshal at jlab.org>
> Cc: "Tyler Lemon" <tlemon at jlab.org>, "Krister Bruhwel"
> <bruhwel at jlab.org>, "Ruben Fair" <rfair at jlab.org>, "Ramakrishna
> Bachimanchi" <bachiman at jlab.org>, "Pablo Campero Rojas"
> <campero at jlab.org>, "Scot Spiegel" <spiegel at jlab.org>, "dsg-hallb
> magnets" <dsg-hallb_magnets at jlab.org>
> Sent: Tuesday, May 16, 2017 11:51:50 AM
> Subject: Re: Hall B Solenoid - Additional TP for new relief valve
> Hello,
> 211 and 212
> Thanks,
> Krister
> On Tue, May 16, 2017 at 08:03:30AM -0400, Probir Ghoshal wrote:
> > Tyler,
> >
> > The calibration is exactly same as we have for all other Pt100
> (aluminum block) used in the system.
> >
> > Krister- Could you please provide the Sr numbers for the Pt100
> sensors.
> >
> > Regards
> >
> > Probir
> > ----- Original Message -----
> > From: "Tyler Lemon" <tlemon at jlab.org>
> > To: "Ruben Fair" <rfair at jlab.org>
> > Cc: "Ramakrishna Bachimanchi" <bachiman at jlab.org>, "Probir Ghoshal"
> <ghoshal at jlab.org>, "Pablo Campero Rojas" <campero at jlab.org>, "Scot
> Spiegel" <spiegel at jlab.org>, "dsg-hallb magnets"
> <dsg-hallb_magnets at jlab.org>
> > Sent: Tuesday, May 16, 2017 7:43:39 AM
> > Subject: Re: Hall B Solenoid - Additional TP for new relief valve
> >
> > Ruben,
> >
> > What is the serial number for the new PT100? Also, is there a
> calibration curve for the sensor?
> >
> > Please let me know so I can update the LV cRIO program.
> >
> > Best regards,
> > Tyler
> >
> >
> > From: "Ruben Fair" <rfair at jlab.org>
> > To: "Ramakrishna Bachimanchi" <bachiman at jlab.org>
> > Cc: "Probir Ghoshal" <ghoshal at jlab.org>, "Pablo Campero Rojas"
> <campero at jlab.org>, "Tyler Lemon" <tlemon at jlab.org>, "Scot Spiegel"
> <spiegel at jlab.org>
> > Sent: Monday, May 15, 2017 2:20:58 PM
> > Subject: Fwd: Hall B Solenoid - Additional TP for new relief valve
> >
> > Hi Rama,
> >
> > Please see note below.
> >
> > We have to install an additional PT102.
> >
> > Can you provide a channel?
> >
> > Regards
> >
> > Ruben
> >
> >
> > From: "Scot Spiegel" <spiegel at jlab.org>
> > To: "Ruben Fair" <rfair at jlab.org>, "Pablo Campero Rojas"
> <campero at jlab.org>, "bachiman" <bachiman at jlab.org>
> > Cc: "Probir Ghoshal" <ghoshal at jlab.org>, "Renuka Rajput-Ghoshal"
> <renuka at jlab.org>, "Krister Bruhwel" <bruhwel at jlab.org>, "Nicholas
> Sandoval" <sandoval at jlab.org>
> > Sent: Monday, May 15, 2017 2:18:37 PM
> > Subject: Re: Hall B Solenoid - Additional TP for new relief valve
> >
> > Gents,
> >
> > You cannot use any of the CRYOCON channels... as they are paired i.e.
> A-B, C-D etc. and already grouped together and not available for a
> single input.
> >
> > I talked with Probir and he said any LV Chassis channel will suffice.
> Rama just needs to I.D. an appropriate channel to use and it can be
> plugged in directly.
> >
> > This is the quickest and least disruptive to the already checked
> systems. I have already given Krister the 100' labeled (TP8680) cable.
> He needs the Mounting and PT-102's
> >
> > Feedback welcomed.
> >
> > Best regards,
> >
> > Scot Spiegel
> > Sr. Technologist / Designer
> > Physics / Hall D
> > JSA Jefferson Lab
> > 12000 Jefferson Ave.
> > Bldg. 55 Rm. 1546-24
> > Newport News, VA. 23606
> > Ph. 757-536-5900
> > Wk. 757-269-5900
> >
> >
> > From: "Ruben Fair" <rfair at jlab.org>
> > To: "Tyler Lemon" <tlemon at jlab.org>
> > Cc: "Joseph Matalevich" <josephm at jlab.org>, "Renuka Rajput-Ghoshal"
> <renuka at jlab.org>, "Krister Bruhwel" <bruhwel at jlab.org>, "Scot Spiegel"
> <spiegel at jlab.org>, "Pablo Campero" <campero at jlab.org>, "Wesley Moore"
> <wmoore at jlab.org>
> > Sent: Monday, May 15, 2017 2:05:37 PM
> > Subject: Re: Hall B Solenoid - Additional TP for new relief valve
> >
> > Tyler, Pablo.
> >
> > I suggest we use Cryocon unit 1, channel F for the new TP8680.
> >
> > Please work with Wesley to get the relevant EPICS screen updated once
> we have the updated P and ID from Joe.
> >
> > Ruben
> >
> >
> >
> > From: "Tyler Lemon" <tlemon at jlab.org>
> > To: "Ruben Fair" <rfair at jlab.org>, "Joseph Matalevich"
> <josephm at jlab.org>, "Renuka Rajput-Ghoshal" <renuka at jlab.org>, "Krister
> Bruhwel" <bruhwel at jlab.org>, "Scot Spiegel" <spiegel at jlab.org>, "Pablo
> Campero Rojas" <campero at jlab.org>, "dsg-hallb magnets"
> <dsg-hallb_magnets at jlab.org>
> > Sent: Monday, May 15, 2017 11:29:26 AM
> > Subject: Re: Hall B Solenoid - Additional TP for new relief valve
> --
> ――――――――――――――――――――――――――――――――――――――――――――――――――
> Krister Bruhwel : Jefferson Lab : (757) 269-7868
> ――――――――――――――――――――――――――――――――――――――――――――――――――
--
――――――――――――――――――――――――――――――――――――――――――――――――――
Krister Bruhwel : Jefferson Lab : (757) 269-7868
――――――――――――――――――――――――――――――――――――――――――――――――――
_______________________________________________
Dsg-hallb_magnets mailing list
Dsg-hallb_magnets at jlab.org
https://mailman.jlab.org/mailman/listinfo/dsg-hallb_magnets
More information about the Dsg-hallb_magnets
mailing list