[Dsg-hallb_magnets] Quench 4 Data File

[Brian Eng]

I scrolled back 3 minutes and didn't see any quenches that didn't trip the QD, i.e. the magnet recovered itself.

I did find this ~5 minutes earlier when the magnet was steady at 1000A.

Not sure what is going on there.

----- Original Message -----
> From: "Brian Eng" <beng at jlab.org>
> To: "Renuka Rajput-Ghoshal" <renuka at jlab.org>
> Cc: "dsg-hallb magnets" <dsg-hallb_magnets at jlab.org>
> Sent: Friday, September 15, 2017 9:57:23 AM
> Subject: Re: [Dsg-hallb_magnets] Quench 4 Data File

> Not sure why that previous file didn't capture the quench, I expanded the window
> slightly this time.
> 
> 09:07:55 to 09:07:59
> 
> ----- Original Message -----
>> From: "Brian Eng" <beng at jlab.org>
>> To: "Renuka Rajput-Ghoshal" <renuka at jlab.org>
>> Cc: "dsg-hallb magnets" <dsg-hallb_magnets at jlab.org>
>> Sent: Friday, September 15, 2017 9:30:53 AM
>> Subject: [Dsg-hallb_magnets] Quench 4 Data File
> 
>> Hi Renuka,
>> 
>> Attached is a zip of the quench this morning from 09:07:57 to 09:07:59 (it looks
>> like the dump switch went around 09:07:58.4), this is the non-synchronized
>> version.
>> 
>> VT8 (Coil 3) looks to be the one that quenched.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: clonpc12_20170915_104127.gif
Type: image/gif
Size: 24285 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_magnets/attachments/20170915/54d039a1/attachment-0001.gif>