[Dsg-hallb_magnets] PR for cRIO for Fast DAQ for Magnets

[Amrit Yegneswaran]

there is an Indian saying: don't buy an elephant if you don't have the resources to feed it. 
hallb b needs spares for plcs and cRIOs as fish needs water. 


thanks for all the good work brian, and thanks for not saying no spares no go! 


From: "Brian Eng" <beng at jlab.org> 
To: "Volker Burkert" <burkert at jlab.org> 
Cc: "dsg-hallb magnets" <dsg-hallb_magnets at jlab.org> 
Sent: Monday, April 2, 2018 9:43:13 AM 
Subject: [Dsg-hallb_magnets] PR for cRIO for Fast DAQ for Magnets 

Hi Volker, 

Yesterday we had both cRIOs that are used for the logging magnet voltage tap data fail. 

Since there was only one spare on hand for the magnets I had to use the one for the gas system that was used for testing & development (as well as its spare). 

I put in a PR for one cRIO to replace the one from the gas system (PR# 376196), as that is the bare minimum required. If there is funding available in the future we should probably order another as well. 

Thanks 
-- 
Brian Eng 
Detector Support Group 
757-269-6018 
_______________________________________________ 
Dsg-hallb_magnets mailing list 
Dsg-hallb_magnets at jlab.org 
https://mailman.jlab.org/mailman/listinfo/dsg-hallb_magnets 
G 
M 
T 
		
		
	
	
	
	
Text-to-speech function is limited to 200 characters 
	
	Options : History : Feedback : Donate 	Close 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_magnets/attachments/20180402/81f9c46d/attachment.html>