[Dsg-hallb_magnets] PLC module spares - Solenoid/Torus

[Brian Eng]

Okay, sounds like maybe we should do that tomorrow then after the magnet is powered down.

Ruben,

Are you okay with that?

----- Original Message -----
> From: "Nick Sandoval" <sandoval at jlab.org>
> To: "Brian Eng" <beng at jlab.org>
> Sent: Thursday, April 5, 2018 2:32:17 PM
> Subject: Re: [Dsg-hallb_magnets] PLC module spares - Solenoid/Torus

> Yes, but i have never done it with magnet powered. It will disconnect frpm
> controller momentarily then reconnect. It has never cycled contacts in the past
> but.... It is detailed in a log entry or on this dsg email chain. Sorry i am
> out righr now or i could pull it up. Nick ----- Original Message ----- From:
> Brian Eng To: Nick Sandoval Cc: dsg-hallb magnets Sent: Thu, 05 Apr 2018
> 14:26:22 -0400 (EDT) Subject: Re: [Dsg-hallb_magnets] PLC module spares -
> Solenoid/Torus The reset module button from the properties window? Just wanted
> to double check before I actually pushed it. Although the Torus SOE properly
> cleared out the timestamps it had when the interlocks were cleared. -----
> Original Message ----- > From: "Nick Sandoval" > To: "Brian Eng" > Cc: "Pablo
> Campero" , "dsg-hallb magnets" > Sent: Thursday, April 5, 2018 2:15:02 PM >
> Subject: Re: [Dsg-hallb_magnets] PLC module spares - Solenoid/Torus > Perform a
> module reset. That will clear them. ----- Original Message ----- From: > Brian
> Eng To: Nick Sandoval Cc: Pablo Campero , dsg-hallb magnets Sent: Thu, 05 > Apr
> 2018 13:33:22 -0400 (EDT) Subject: Re: [Dsg-hallb_magnets] PLC module > spares
> - Solenoid/Torus Yeah, I could only find the 3 controllers he ordered, >
> figured he borrowed it from cryo. In any event no spares there. However, he did
> > order 3 SOE modules (plus the one you ordered). So shouldn't there be a spare
> > SOE somewhere? We really need to replace the one on the solenoid. Pablo and I
> > tried manually clearing the timestamps on individual channels, but have only
> > managed to clear 2 of them. All the rest still have old data. > On Apr 5,
> 2018, > at 12:39 PM, Nick Sandoval wrote: > > Hi Brian, Only a chassis and
> power supply > that he borrowed from halld. Best, Nick