[Dsg-hallb_magnets] Solenoid VT monitoring

[Ruben Fair]

Absolutely Amrit - will do.

Regards

Ruben

> On Feb 21, 2018, at 7:08 PM, Amrit Yegneswaran <yeg at jlab.org> wrote:
> 
> hi probir/ruben,
> much thanks for answering pablo's questions.
> i have one comment though.
> When the magnet support group (MSG!) schedules meetings, i would very much like that pablo, tyler and amanda are invited as well.
> this is because i want all dsg staff, who support the magnet (pablo, brian, tyler, and amanda) to be on the same page, figuratively speaking.
> the only exception is pete bonneau; but since he was electronics architect and operations meister for the clas 6 torus, i don't see the need for him to attend the meetings, unless of course there is an exceptional situation and you wish to have an exceptional solution.
> 
> i'm pleased to note that pablo, brian, tyler, and amanda are taking the task of monitoring the magnets earnestly.
> i'm confident that both of you will be extremely satisfied with their contributions.
> amrit
> 
> From: "Probir Ghoshal" <ghoshal at jlab.org>
> To: "Pablo Campero" <campero at jlab.org>
> Cc: "dsg-hallb magnets" <dsg-hallb_magnets at jlab.org>
> Sent: Wednesday, February 21, 2018 1:09:48 PM
> Subject: Re: [Dsg-hallb_magnets] Solenoid VT monitoring
> 
> Thanks Pablo,
> 
> Really appreciate your thoughts and questions.
> 
> If you talk to Brian, your will know this is still on going..!
> 
> The h/w QD are two wires of the designated section across components like splices and coils..!
> But the S/w sum's are through ISO A and crio and added up to make the section identical to the h/w section cover in the QD....!
> 
> Hardware threshold are different than the s/w threshold...sums and others.
> 
> second Question about "which VT generated the fast dump? we are still evaluating.."
> 
> The question is - all nine days the magnet was okay but as soon as magnet sensed that is going to be ramp down, decided to fast dump. We need to see carefully (out of the box) what else can effect the magnet...that cascades slow to effect...eg temp..Why and how??
> 
> Ruben has organized a meeting this afternoon to review the data..your are most welcome to attend (Brian E will be attending).
> 
> Regards
> 
> Probir
> 
> ----- Original Message -----
> From: "Pablo Campero" <campero at jlab.org>
> To: "dsg-hallb magnets" <dsg-hallb_magnets at jlab.org>
> Sent: Wednesday, February 21, 2018 11:09:51 AM
> Subject: [Dsg-hallb_magnets] Solenoid VT monitoring
> 
> Hello Probir, 
> 
> DSG noticed during the last Solenoid fast dump (02/19/2018) that voltage taps SUM values did not exceed the set thresholds on the QD1. 
> Are the QDs supposed to look at the SUM of the voltage tap combinations values or the QDs are configured to check the voltage tap values individually to then compare with the set thresholds? 
> Which voltage tap/s generated the last Solenoid fast dump? 
> 
> Regards, 
> Pablo 
> 
> _______________________________________________
> Dsg-hallb_magnets mailing list
> Dsg-hallb_magnets at jlab.org
> https://mailman.jlab.org/mailman/listinfo/dsg-hallb_magnets
> _______________________________________________
> Dsg-hallb_magnets mailing list
> Dsg-hallb_magnets at jlab.org
> https://mailman.jlab.org/mailman/listinfo/dsg-hallb_magnets
> _______________________________________________
> Dsg-hallb_magnets mailing list
> Dsg-hallb_magnets at jlab.org
> https://mailman.jlab.org/mailman/listinfo/dsg-hallb_magnets
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_magnets/attachments/20180221/172bc178/attachment-0001.html>