[Dsg-hallb_magnets] Instrumentation Checkout

[Brian Eng]

Dave,

Thanks for the values, definitely a good starting point.

Regarding these 2 PVs listed under the DBX that you highlighted.
B_TORUS:LN2:TC8559F
B_TORUS:LN2:TC8559M

Those are both on the Torus LN2 screen. I was just copy and pasting from the instrument checkouts and that's what section they're under for both of the magnets.

If the CP & SC LL sensors for the Torus are important the checkout should be updated and not just have it on this list, but I'll add them to the script in the assumption they do get added.

----- Original Message -----
> From: "Dave Kashy" <kashy at jlab.org>
> To: "Brian Eng" <beng at jlab.org>
> Cc: "dsg-hallb magnets" <dsg-hallb_magnets at jlab.org>, "Amrit Yegneswaran" <yeg at jlab.org>, "Ruben Fair" <rfair at jlab.org>,
> "Nick Sandoval" <sandoval at jlab.org>, "Probir Ghoshal" <ghoshal at jlab.org>
> Sent: Saturday, July 28, 2018 9:54:09 AM
> Subject: Re: [Dsg-hallb_magnets] Instrumentation Checkout

> Hi Brian,
> I went through the spread sheet and added some descriptions, comments and lots
> of values.
> Some of the values I entered may need tweaking, but this will become more
> obvious as we use it...
> 
> I  also added some LL signals that were not on it and I also highlighted some
> cells of interest that we should look at and later remove the highlights.
> 
> Ruben and Probir,
> I'll let you fill in the Hall Sensor values.
> 
> Nick,
> Do we want to start here with the Alarms to add value to this sheet and to
> minimize the additional number of spread sheets?
> 
> Thanks All,
> Dave
> 
> ----- Original Message -----
> From: "Brian Eng" <beng at jlab.org>
> To: "kashy" <kashy at jlab.org>
> Cc: "dsg-hallb magnets" <dsg-hallb_magnets at jlab.org>, "Amrit Yegneswaran"
> <yeg at jlab.org>
> Sent: Friday, July 27, 2018 6:41:00 PM
> Subject: Re: [Dsg-hallb_magnets] Instrumentation Checkout
> 
> Hi Dave,
> 
> Attached is an Excel file that has 3 sheets (DBX, Solenoid, Torus) with the PVs
> and values from the logbook entries.
> 
> I was thinking even having something simple like < 8 K, > 1 atm, etc. would be
> good for a first try of pass/fail test.
> 
> Also, I should be able to use the EPICS alarm values for the PV if it has one
> for the pass/fail.
> So if a LOLO, LOW, HIGH or HIHI exists and would be fine just put that.
> 
> ----- Original Message -----
>> From: "Dave Kashy" <kashy at jlab.org>
>> To: "Brian Eng" <beng at jlab.org>
>> Cc: "dsg-hallb magnets" <dsg-hallb_magnets at jlab.org>, "Amrit Yegneswaran"
>> <yeg at jlab.org>
>> Sent: Friday, July 27, 2018 5:57:29 PM
>> Subject: Re: [Dsg-hallb_magnets] Instrumentation Checkout
> 
>> Hi Brian,
>> The values all look good. I can make a list from this that you  could make a
>> comparison to.
>> It may need tweaking for standard excursions.
>> If you send me this table in a spread sheet I can send it back filled out.
> > Dave