[Dsg-hallb_magnets] Hall B Solenoid Networking

[Ruben Fair]

Yes Brent - please liaise with either Eugene Pasyuk or Stepan Stepanyan to determine the best time to do this.

Regards

Ruben
________________________________
From: Dsg-hallb_magnets <dsg-hallb_magnets-bounces at jlab.org> on behalf of beng at jlab.org <beng at jlab.org>
Sent: Monday, February 17, 2020 3:38 PM
To: Brent Morris <bmorris at jlab.org>
Cc: Andrew Seitz <seitz at jlab.org>; Carl Bolitho <cbolitho at jlab.org>; dsg-hallb magnets <dsg-hallb_magnets at jlab.org>
Subject: Re: [Dsg-hallb_magnets] Hall B Solenoid Networking

Hi Brent,

You'll need to coordinate with Hall B and the magnet group for when the best time to reboot the switch is, but if it's still having errors it sounds like it should be done ASAP?

On Feb 17, 2020 14:39, Brent Morris <bmorris at jlab.org> wrote:
Yes, I just checked the network switch log and found that around 3:45am yesterday the switch started throwing a TCAM error every few minutes and it's still occurring.

Usually a reboot fixes the problem.  If not, it will have to be replaced.  You can either pull the power to reboot it or I can do it remotely.  If you'd like me to do, just let me know when.

-Brent

________________________________
From: Brian Eng <beng at jlab.org>
Sent: Sunday, February 16, 2020 1:21 PM
To: Brent Morris <bmorris at jlab.org>; Carl Bolitho <cbolitho at jlab.org>
Cc: dsg-hallb magnets <dsg-hallb_magnets at jlab.org>
Subject: Hall B Solenoid Networking

https://logbooks.jlab.org/entry/3785147

Can you guys see if anything was going on with these devices or switch they were plugged into earlier today?

hallb-435nbx-2
hallb-490nbx-3
hb-cryocon-1

Thanks

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_magnets/attachments/20200217/e44fdf9c/attachment.html>