[Dsg-hallb_magnets] MPS Interlock Label

[Brian Eng]

These two screens, it's in the section in the lower left corner.

________________________________
From: Nathan Baltzell <baltzell at jlab.org>
Sent: Friday, October 14, 2022 1:39 PM
To: Brian Eng <beng at jlab.org>
Cc: dsg-hallb magnets <dsg-hallb_magnets at jlab.org>
Subject: Re: MPS Interlock Label

Hi Bryan,

Just to be sure, can you send me a screenshot of the screen in question?

-Nathan

On Oct 14, 2022, at 1:36 PM, Brian Eng <beng at jlab.org<mailto:beng at jlab.org>> wrote:

Hi Nathan,

Can you change the CSS screen for both the torus and solenoid Interlock status screens under the MPS Internal Interlocks section

For these PVs
B_TORUS:MPS:Status.BD
B_SOL:MPS:Status.BD

>From the existing label of "Pre-regulator" to "Dump Switch"

Thanks

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_magnets/attachments/20221014/3935e1dc/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Screen Shot 2022-10-14 at 1.41.57 PM.png
Type: image/png
Size: 379402 bytes
Desc: Screen Shot 2022-10-14 at 1.41.57 PM.png
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_magnets/attachments/20221014/3935e1dc/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Screen Shot 2022-10-14 at 1.42.19 PM.png
Type: image/png
Size: 375446 bytes
Desc: Screen Shot 2022-10-14 at 1.42.19 PM.png
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_magnets/attachments/20221014/3935e1dc/attachment-0003.png>