<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=Windows-1252">
<style type="text/css" style="display:none;"> P {margin-top:0;margin-bottom:0;} </style>
</head>
<body dir="ltr">
<div style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);" class="elementToProof">
Hi Valery,</div>
<div style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);" class="elementToProof">
<br>
</div>
<div style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);" class="elementToProof">
I was able to more the two S1 air flow measurements to the new ADC channels.</div>
<div style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);" class="elementToProof">
But, I ran in to trouble getting the peripheral I<sup>2</sup>C ADC for the air pressure and nitrogen flow working in the hall.</div>
<div style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);" class="elementToProof">
<br>
</div>
<div style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);" class="elementToProof">
So for now, I've left the expansion chassis in the system to read the cooling buffer tank pressure and nitrogen purge flow.</div>
<div style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);" class="elementToProof">
<br>
</div>
<div style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);" class="elementToProof">
My plan going forward is:</div>
<div style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);" class="elementToProof">
1 - check all of the the S1 humidity and temperature sensors (ran out of time today) </div>
<div style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);" class="elementToProof">
2 - debug I<sup>2</sup>C ADC in EEL </div>
<div style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);" class="elementToProof">
3 - If I<sup>2</sup>C ADC works in EEL and is operates stably for at least 3 days, try again in the hall</div>
<div style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);" class="elementToProof">
<br>
</div>
<div style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);" class="elementToProof">
I anticipate that #2 and #3 will take some time, maybe two weeks.</div>
<div style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);" class="elementToProof">
Since the start of the Physics run has been pushed back to the end of March, we should still have time to implement the change to the I<sup>2</sup>C ADC.</div>
<div style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);" class="elementToProof">
<br>
</div>
<div style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);" class="elementToProof">
I'll post a logbook entry for today and I'll keep you updated on the rest.</div>
<div style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);" class="elementToProof">
<br>
</div>
<div style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);" class="elementToProof">
Thanks!</div>
<div style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);" class="elementToProof">
<br>
</div>
<div style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);" class="elementToProof">
-Tyler</div>
<div id="appendonsend"></div>
<hr style="display:inline-block;width:98%" tabindex="-1">
<div id="divRplyFwdMsg" dir="ltr"><font face="Calibri, sans-serif" style="font-size:11pt" color="#000000"><b>From:</b> Valery Kubarovsky <vpk@jlab.org><br>
<b>Sent:</b> Tuesday, February 17, 2026 12:24 PM<br>
<b>To:</b> Tyler Lemon <tlemon@jlab.org>; tlemon--- via dsg-hallb_rich <dsg-hallb_rich@jlab.org><br>
<b>Subject:</b> Re: Update/modify RICH S1 hardware interlock system on Feb. 17 to improve reliability?</font>
<div> </div>
</div>
<style type="text/css" style="display:none">
<!--
p
{margin-top:0;
margin-bottom:0}
-->
</style>
<div dir="ltr">
<div class="x_elementToProof" style="font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
Thanks Tyler!</div>
<div class="x_elementToProof" style="font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
Valery</div>
<div id="x_appendonsend"></div>
<hr tabindex="-1" style="display:inline-block; width:98%">
<div id="x_divRplyFwdMsg" dir="ltr"><font face="Calibri, sans-serif" color="#000000" style="font-size:11pt"><b>From:</b> Tyler Lemon <tlemon@jlab.org><br>
<b>Sent:</b> Tuesday, February 17, 2026 09:28<br>
<b>To:</b> Valery Kubarovsky <vpk@jlab.org>; tlemon--- via dsg-hallb_rich <dsg-hallb_rich@jlab.org>; Tyler Lemon <tlemon@jlab.org><br>
<b>Subject:</b> Re: Update/modify RICH S1 hardware interlock system on Feb. 17 to improve reliability?</font>
<div> </div>
</div>
<style type="text/css" style="display:none">
<!--
p
{margin-top:0;
margin-bottom:0}
-->
</style>
<div dir="ltr">
<div class="x_x_elementToProof" style="font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
Hello Valery,</div>
<div class="x_x_elementToProof" style="font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div class="x_x_elementToProof" style="font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
I'm going to start working on the RICH S1 hardware interlocks soon.</div>
<div class="x_x_elementToProof" style="font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div class="x_x_elementToProof" style="font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
My plan is:</div>
<div class="x_x_elementToProof" style="font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
1. Make software updates remotely from the EEL</div>
<div class="x_x_elementToProof" style="font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
2. Go down to hall and swap out hardware</div>
<div class="x_x_elementToProof" style="font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
3. Verify system is working after changes</div>
<div class="x_x_elementToProof" style="font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
4. Check humidity sensors</div>
<div class="x_x_elementToProof" style="font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div class="x_x_elementToProof" style="font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
Between steps 1 and 2, there will be some time where all gas system readout for S1 will be lost since the software updates re-map ADC channels (the same thing would happen if the order of steps 1 and 2 were swapped). </div>
<div class="x_x_elementToProof" style="font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div class="x_x_elementToProof" style="font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
During this time, the nitrogen flow to S1 can be inferred from the S4 nitrogen purge flow and the nitrogen gas panel pressures at the bottom of the RICH Sector 4 Nitrogen Volume Interlocks EPICS screen. Since the nitrogen purge flow is for both detector is
provided by the same panel, if those Sector 4 values are normal, there is high confidence that Sector 1's nitrogen flow is okay.</div>
<div class="x_x_elementToProof" style="font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div class="x_x_elementToProof" style="font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
I will make a log book entries when everything is done.</div>
<div class="x_x_elementToProof" style="font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div class="x_x_elementToProof" style="font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
-Tyler</div>
<div class="x_x_elementToProof" style="font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div class="x_x_elementToProof" style="font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div id="x_x_appendonsend"></div>
<hr tabindex="-1" style="display:inline-block; width:98%">
<div id="x_x_divRplyFwdMsg" dir="ltr"><font face="Calibri, sans-serif" color="#000000" style="font-size:11pt"><b>From:</b> dsg-hallb_rich <dsg-hallb_rich-bounces@jlab.org> on behalf of Tyler Lemon via dsg-hallb_rich <dsg-hallb_rich@jlab.org><br>
<b>Sent:</b> Friday, February 13, 2026 4:27 PM<br>
<b>To:</b> Valery Kubarovsky <vpk@jlab.org>; tlemon--- via dsg-hallb_rich <dsg-hallb_rich@jlab.org><br>
<b>Subject:</b> Re: [dsg-hallb_rich] Update/modify RICH S1 hardware interlock system on Feb. 17 to improve reliability?</font>
<div> </div>
</div>
<div>
<div style="font-family:Aptos,-apple-system,HelveticaNeue,sans-serif; font-size:12pt">
<div dir="ltr" style="font-family:Aptos,Aptos_MSFontService,-apple-system,Roboto,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
Valery,</div>
<div dir="ltr" style="font-family:Aptos,Aptos_MSFontService,-apple-system,Roboto,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div dir="ltr" style="font-family:Aptos,Aptos_MSFontService,-apple-system,Roboto,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
My answer regarding the Sector 1 humidity sensors is the same as it always is. </div>
<div dir="ltr" style="font-family:Aptos,Aptos_MSFontService,-apple-system,Roboto,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div dir="ltr" style="font-family:Aptos,Aptos_MSFontService,-apple-system,Roboto,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
The humidity in the detector is so low that the sensors cannot read that low and are returning zero percent relative humidity. It has been like that for the lifetime of the detector. </div>
<div dir="ltr" style="font-family:Aptos,Aptos_MSFontService,-apple-system,Roboto,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div dir="ltr" style="font-family:Aptos,Aptos_MSFontService,-apple-system,Roboto,Arial,Helvetica,sans-serif; font-size:16px; color:rgb(0,0,0)">
Additionally, if the sensors were truly broken, every single temperature readout for the Sector 1 nitrogen volume sensors would be -45 (it’s lowest possible value).</div>
<div dir="ltr" style="font-family:Aptos,Aptos_MSFontService,-apple-system,Roboto,Arial,Helvetica,sans-serif; font-size:16px; color:rgb(0,0,0)">
The same sensor measures temperature and humidity, so if one read out is broken, both will be broken. </div>
<div dir="ltr" style="font-family:Aptos,Aptos_MSFontService,-apple-system,Roboto,Arial,Helvetica,sans-serif; font-size:16px; color:rgb(0,0,0)">
This can be seen with T3 and T29. </div>
<div dir="ltr" style="font-family:Aptos,Aptos_MSFontService,-apple-system,Roboto,Arial,Helvetica,sans-serif; font-size:12pt">
The other 46 sensors are responding as normal and have valid temperatures and valid humidity values and therefore are working. </div>
<div dir="ltr" style="font-family:Aptos,Aptos_MSFontService,-apple-system,Roboto,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div dir="ltr" style="font-family:Aptos,Aptos_MSFontService,-apple-system,Roboto,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div dir="ltr" style="font-family:Aptos,Aptos_MSFontService,-apple-system,Roboto,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
But, regardless of all that, I will still check the nitrogen volume sensors after the other work on Tuesday.</div>
<div dir="ltr" style="font-family:Aptos,Aptos_MSFontService,-apple-system,Roboto,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
I will also send the procedure for how I checked the sensors so you can replicate the test yourself if there is still doubt. </div>
<div dir="ltr" style="font-family:Aptos,Aptos_MSFontService,-apple-system,Roboto,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div dir="ltr" style="font-family:Aptos,Aptos_MSFontService,-apple-system,Roboto,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
-Tyler</div>
</div>
<div id="x_x_x_ms-outlook-mobile-body-separator-line" dir="auto" style="font-family:Aptos,-apple-system,HelveticaNeue,sans-serif; font-size:12pt">
<br>
</div>
<div id="x_x_x_ms-outlook-mobile-signature" style="font-family:Aptos,-apple-system,HelveticaNeue,sans-serif; font-size:12pt">
<div></div>
</div>
<hr tabindex="-1" style="display:inline-block; width:98%">
<div id="x_x_x_divRplyFwdMsg" dir="ltr"><font face="Calibri, sans-serif" color="#000000" style="font-size:11pt"><b>From:</b> Valery Kubarovsky <vpk@jlab.org><br>
<b>Sent:</b> Friday, February 13, 2026 3:52:28 PM<br>
<b>To:</b> tlemon--- via dsg-hallb_rich <dsg-hallb_rich@jlab.org>; Tyler Lemon <tlemon@jlab.org><br>
<b>Subject:</b> Re: Update/modify RICH S1 hardware interlock system on Feb. 17 to improve reliability?</font>
<div> </div>
</div>
<style type="text/css" style="display:none">
<!--
p
{margin-top:0;
margin-bottom:0}
-->
</style>
<div dir="ltr">
<div class="x_x_x_x_elementToProof" style="text-align:left; text-indent:0px; margin-top:1em; margin-bottom:1em; font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
Hello Tyler,</div>
<div class="x_x_x_x_elementToProof" style="text-align:left; text-indent:0px; margin-top:1em; margin-bottom:1em; font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
Please go ahead and implement your proposed changes to the RICH1 interlock. Tuesday, February 17 works well for me.</div>
<div class="x_x_x_x_elementToProof" style="text-align:left; text-indent:0px; margin-top:1em; margin-bottom:1em; font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
I still have a question regarding the humidity measurement in the nitrogen volume of the RICH1 detector. All channels are indicating 0.00%. In my view, this suggests that something may not be functioning correctly in the measurement system.</div>
<div class="x_x_x_x_elementToProof" style="text-align:left; text-indent:0px; margin-top:1em; margin-bottom:1em; font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
Best regards,<br>
Valery</div>
<div class="x_x_x_x_elementToProof" style="font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div class="x_x_x_x_elementToProof" style="font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div style="font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<hr style="display:inline-block; width:98%">
<div id="x_x_x_x_divRplyFwdMsg">
<div style="direction:ltr; font-family:Calibri,sans-serif; font-size:11pt; color:rgb(0,0,0)">
<b>From:</b> dsg-hallb_rich <dsg-hallb_rich-bounces@jlab.org> on behalf of Tyler Lemon via dsg-hallb_rich <dsg-hallb_rich@jlab.org><br>
<b>Sent:</b> Friday, February 13, 2026 13:55<br>
<b>To:</b> tlemon--- via dsg-hallb_rich <dsg-hallb_rich@jlab.org><br>
<b>Subject:</b> [dsg-hallb_rich] Update/modify RICH S1 hardware interlock system on Feb. 17 to improve reliability?</div>
<div style="direction:ltr"> </div>
</div>
<div style="direction:ltr; font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
Hello Valery,</div>
<div style="direction:ltr; font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div style="direction:ltr; font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
In 2025, there were four times where the expansion chassis responsible for measuring RICH Sector 1's two cooling air flows, cooling buffer tank pressure, and nitrogen purge flow failed. </div>
<div style="direction:ltr; font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
On all four occasions, the system could not be recovered remotely and I had to go down to the hall to resolve the problem.</div>
<div style="direction:ltr; font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div style="direction:ltr; font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
This clearly indicates that the expansion chassis is a weak point in the interlock system.</div>
<div style="direction:ltr; font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
DSG has therefore determined alternate measurement methods for these four parameters, allowing us to remove the expansion chassis and improve system reliability.</div>
<div style="direction:ltr; font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div style="direction:ltr; font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
In brief, the changes involve:</div>
<div style="direction:ltr; font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
- moving the two cooling air flows to two spare ADC channels on the system's main controller</div>
<div style="direction:ltr; font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
- moving the cooling buffer tank pressure and nitrogen purge flow to a two-channel, I<sup>2</sup>C ADC board</div>
<div style="direction:ltr; font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div style="direction:ltr; font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
A <a data-auth="NotApplicable" title="https://www.jlab.org/sites/default/files/dsg/notes/2026-02.pdf" class="x_x_x_x_x_OWAAutoLink" id="OWA8c7a0cac-5383-8e3a-09bb-1222f4d7167d" href="https://www.jlab.org/sites/default/files/dsg/notes/2026-02.pdf">
DSG Note posted on our group webpage</a> has more details on the changes.</div>
<div style="direction:ltr; font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div style="direction:ltr; font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div style="direction:ltr; font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
Would next Tuesday, February 17, 2026 be a good day to make these changes?</div>
<div style="direction:ltr; font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div style="direction:ltr; font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
The work would involve updating the hardware interlock software and minor rewiring inside a de-energized interlock chassis (all work covered by existing EPASes).</div>
<div style="direction:ltr; font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div style="direction:ltr; font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div style="direction:ltr; font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
Also, feel free to reply with any questions you may have.</div>
<div style="direction:ltr; font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div style="direction:ltr; font-family:Aptos,Aptos_EmbeddedFont,Aptos_MSFontService,Calibri,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
-Tyler</div>
</div>
</div>
</div>
</div>
</body>
</html>