[Dsg-rtpc] Fwd: Questions about the gas systems

[Carlos Ayerbe]

FYI

Goerge already has it.

-Carlos

----- Forwarded Message -----
From: "William Crahen" <wcrahen at jlab.org>
To: "George Jacobs" <jacobsg at jlab.org>, "Carlos Ayerbe Gayoso" <gayoso at jlab.org>
Cc: "Bob Miller" <rmiller at jlab.org>
Sent: Tuesday, June 26, 2018 4:30:48 PM
Subject: Questions about the gas systems

Hi guys- Carlos provided me with some documentation on the parts you are 
planning to use- I see a parts list showing a relief valve RV1 = STLMO 
model ST25-1/4", set to crack at 75 psi, presumably accommodating 74 
scfm at some higher pressure. Do you plan to use this? If so, I need to 
see a cut sheet on it with flow curves, etc. Alternately, is this 
replaced by the CONRADER valve I find elsewhere in this documentation?