[Dsg-rtpc] [EXTERNAL] DMS installation on the gas panel

[mhattawy@odu.edu]

Hello Bob,
   Following our meeting on Nov 22nd regarding the DMS installation and
integration on the gas panel. Our device is ready with its enclosure box.
Check the attachment picture. Thanks to Nate Dzbenski who carried out the
whole work on this. I would suggest the following plan:
1. The DMS will be at EEL125 tomorrow at 12:00 pm.
2. We will need help from Bob to adjust the gas panel and hang the
enclosure box on the gas panel.
3. We will need help from Adam regarding getting the sources and having all
the required labels.
4. Place the DMS in its place with all the gas lines in place.

Best regards,
Mohammad Hattawy.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-rtpc/attachments/20191201/ef93da28/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: DMS.jpg
Type: image/jpeg
Size: 145429 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-rtpc/attachments/20191201/ef93da28/attachment-0001.jpg>