[Dsg-rtpc] Need to borrow a calibrated pressure test gauge for RTPC valve panel

[Howard Fenker]

George,
You might check with Walter Kellner to see if Hall C has one that is suitable. 
   Howard

> On May 17, 2019, at 5:33 PM, Brian Eng <beng at jlab.org> wrote:
> 
> I found a 0-100 psi test gauge, but it's calibration expired last year so I don't know if that will work for the tests you and Bill are trying to do?
> 
>> On May 17, 2019, at 4:51 PM, George Jacobs <jacobsg at jlab.org> wrote:
>> 
>> Hi Denny,
>> 
>> The test pressure is 30 psi, so we need a calibrated test gauge ranged 0 to 40-120 psi range. Do you have any in this range? 1/4 NPT if at all possible.
>> 
>> Thanks,
>> George
> 
> 
> _______________________________________________
> Dsg-rtpc mailing list
> Dsg-rtpc at jlab.org
> https://mailman.jlab.org/mailman/listinfo/dsg-rtpc