[dsg-hallb_rtpc] Deuterium bottle Regulator

[Jiwan Poudel]

Hello Carlos,

If you see carefully, the needle in the pressure gauge is at ~1500 touching the scale pad of gauge. So to make sure the gauge is showing right pressure of bottle, we need to change it. For now it works, but need to change.

I checked this, closing the gas bottle for a while while purging the target and it could not go down unless tapped by hand.

Thank you,
Jiwan


> On Aug 12, 2020, at 5:43 PM, Carlos Ayerbe Gayoso <gayoso at jlab.org> wrote:
> 
> Hi all, 
> 
> as mentioned by Stephan, the high pressure indicator of the deuterium bottle seems to show lower pressure that should be (I checked again and it shows ~ 1500psi)
> 
> If the plan is to change the regulator (I don't know) and the problem is to find one (also, I don't know) I wonder if one of the regulators from W&M is available and if can be used. In the meanwhile, it seems to work well.
> 
> Cheers
> 
> -Carlos
> _______________________________________________
> dsg-hallb_rtpc mailing list
> dsg-hallb_rtpc at jlab.org <mailto:dsg-hallb_rtpc at jlab.org>
> https://mailman.jlab.org/mailman/listinfo/dsg-hallb_rtpc <https://mailman.jlab.org/mailman/listinfo/dsg-hallb_rtpc>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rtpc/attachments/20200812/daa9ef62/attachment.html>