[dsg-hallb_rtpc] [EXTERNAL] Re: Deuterium bottle Regulator

[Carlos Ayerbe Gayoso]

Ok, please everybody calm down.

The intention of my email was trying to find a solution to something that IT WAS not a problem and not urgent.

Bryan has been very kind explaining that it is not as simple as take the first regulator, like one from W&M; and before my email, Stephan and Jiwan said that Morgan is taken care of it. My intention was to provide a fast resolution.

Thanks, everybody.

-Carlos
________________________________
From: dsg-hallb_rtpc <dsg-hallb_rtpc-bounces at jlab.org> on behalf of Jiwan Poudel <jpoudel at jlab.org>
Sent: Wednesday, August 12, 2020 6:11 PM
To: dsg-hallb_rtpc at jlab.org <dsg-hallb_rtpc at jlab.org>; mhattawy at odu.edu <mohammad.hattawy at gmail.com>
Cc: Bob Miller <rmiller at jlab.org>; Morgan Cook IV <mcookiv at jlab.org>
Subject: Re: [dsg-hallb_rtpc] [EXTERNAL] Re: Deuterium bottle Regulator

Morgan looked at it and told Stephen that he does not have a spare right now. Morgan also confirmed that regulator is working, and only one gauge (higher pressure side) seems bad. So we might get the replacement of that one soon.

On Aug 12, 2020, at 6:06 PM, mhattawy at odu.edu<mailto:mhattawy at odu.edu> <mohammad.hattawy at gmail.com<mailto:mohammad.hattawy at gmail.com>> wrote:

I will be providing tonight during my shift some pics and specifications for the model we are using.

On Wed, Aug 12, 2020 at 6:05 PM Brian Eng <beng at jlab.org<mailto:beng at jlab.org>> wrote:
Unless someone has the exact model that is currently installed it's not as straight forward as just finding another regulator and swapping them out.

In any event since the regulator is part of the pressure system make sure to coordinate the work with Bob.

________________________________
From: dsg-hallb_rtpc <dsg-hallb_rtpc-bounces at jlab.org<mailto:dsg-hallb_rtpc-bounces at jlab.org>> on behalf of Carlos Ayerbe Gayoso <gayoso at jlab.org<mailto:gayoso at jlab.org>>
Sent: Wednesday, August 12, 2020 5:43 PM
To: dsg-hallb_rtpc at jlab.org<mailto:dsg-hallb_rtpc at jlab.org> <dsg-hallb_rtpc at jlab.org<mailto:dsg-hallb_rtpc at jlab.org>>; Sebastian Kuhn <kuhn at jlab.org<mailto:kuhn at jlab.org>>
Cc: Morgan Cook IV <mcookiv at jlab.org<mailto:mcookiv at jlab.org>>
Subject: [dsg-hallb_rtpc] Deuterium bottle Regulator

Hi all,

as mentioned by Stephan, the high pressure indicator of the deuterium bottle seems to show lower pressure that should be (I checked again and it shows ~ 1500psi)

If the plan is to change the regulator (I don't know) and the problem is to find one (also, I don't know) I wonder if one of the regulators from W&M is available and if can be used. In the meanwhile, it seems to work well.

Cheers

-Carlos
_______________________________________________
dsg-hallb_rtpc mailing list
dsg-hallb_rtpc at jlab.org<mailto:dsg-hallb_rtpc at jlab.org>
https://mailman.jlab.org/mailman/listinfo/dsg-hallb_rtpc


--
Best regards,
Mohammad Hattawy.
_______________________________________________
dsg-hallb_rtpc mailing list
dsg-hallb_rtpc at jlab.org<mailto:dsg-hallb_rtpc at jlab.org>
https://mailman.jlab.org/mailman/listinfo/dsg-hallb_rtpc

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rtpc/attachments/20200812/fe732bb1/attachment.html>