[Dsg-rtpc] [EXTERNAL] RTDs in RTPC3

[JIWAN POUDEL]

Dear Marc,

To get out from CVT cart we need about 2m cables. We also need 2 such, as
we have two RTDs which should come out of CVT cart. From there to the CPU,
we have cable from Rtpc1 which can be reused.

Thank you,
Jiwan


On Tue, Mar 17, 2020, 08:34 Marc Mcmullen <mcmullen at jlab.org> wrote:

> Good Morning Jiwan,
>
> As you are aware the Lab has started MEDCON 5, which requires us to work
> from home. So I will forward your request to the mailing list and contact
> the DSG manager for guidance. Essentially, you need 2 of the 4 wire RTD
> cables to be extended. How long do you need these cables to be? In the
> future, please send work requests directly to the dsg-rtpc mailing list to
> ensure a wide distribution of the request to the entire DSG.
>
> Regards,
> Marc
> ------------------------------
> *From:* JIWAN POUDEL <jpoud001 at odu.edu>
> *Sent:* Tuesday, March 17, 2020 8:22 AM
> *To:* Brian Eng <beng at jlab.org>; Marc Mcmullen <mcmullen at jlab.org>
> *Cc:* Eric Christy <christy at jlab.org>
> *Subject:* [EXTERNAL] RTDs in RTPC3
>
> Dear Brian and Marc,
>
> We are in the process of replacing Rtpc1 by rtpc3. We decabled Rtpc1
> yesterday and ready to put rtpc3 on cvt cart. There is survey for target
> from 9am to 1pm today, then we will start cabling the RTPC in the
> afternoon. Could you please help us to extend the RTD cables out from CVT
> cart? The cables are not long enough and also have no connectors to extend.
> It is also hard to access RTDs after re-cabling. So we need to fix this
> before cabling is done.
>
> Thank you,
> Jiwan
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rtpc/attachments/20200317/7f1df963/attachment-0002.html>