[Dsg-rtpc] [EXTERNAL] Re: MFC308

[JIWAN POUDEL]

We reinitialze the MFC. Now it's working. Thanks Brian.

On Thu, Mar 19, 2020, 19:00 <jpoudel at jlab.org> wrote:

> Green light is on. I can also ping the address you gave, but still does
> not see any flow. The pressure gauge in front is showing around 7psi, so
> there is gas upto MFC. I set the flow at 100sccm, but dont see any flow.
>
> On Mar 19, 2020 18:46, Brian Eng <beng at jlab.org> wrote:
>
> First make sure it has power (LEDs are on and/or blinking, but no red
> ones!).
> Then see if it is online (ping hb-mfc-bonus-rtpc.jlab.org).
> Lastly reinitialize the MFCs from the LabVIEW GUI (I'm not sure on the
> exact labeling of the button but that should be close).
>
> _Both_ MFC 104 & 308 need to online in order for the cRIO to communicate
> with them. If you see the initialization counter get to 3 there's a
> problem.
>
> ________________________________________
> From: Dsg-rtpc <dsg-rtpc-bounces at jlab.org> on behalf of Carlos Ayerbe
> Gayoso <gayoso at jlab.org>
> Sent: Thursday, March 19, 2020 6:42 PM
> To: dsg-rtpc at jlab.org
> Cc: JIWAN POUDEL
> Subject: [Dsg-rtpc] MFC308
>
> Hi Guys,
>
> Jiwan told me that he has problems to communicate with the MFC308 (I guess
> the number is correct, I have goldfish memory) the one for the CO2/He.
>
> Can you give us a hint how to proceed?
>
> Thank you
>
> -Carlos
>
> _______________________________________________
> Dsg-rtpc mailing list
> Dsg-rtpc at jlab.org
> https://mailman.jlab.org/mailman/listinfo/dsg-rtpc
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rtpc/attachments/20200319/424b3704/attachment-0002.html>