[dsg-svt] SVT Cables

[Brian Eng]

Yuri,

In case you need the actual travelers, they're located here: https://clasweb.jlab.org/instrumentation/SVT/travelers/cables/

I also added a link to that same location from the main Hall B SVT web page.

> On Nov 30, 2016, at 5:52 PM, Marc McMullen <mcmullen at jlab.org> wrote:
> 
> Hi Yuri,
> 
> 
> 
> The SVT cable assemblies were fabricated by Jefferson Lab qualified electrical workers from the Detector Support Group using UL rated cable manufactured by General Wire Products, for the Low Voltage, High Voltage, and Slow Controls cables.  The pulser cables were manufactured at Sabritec using Mil-spec RG-403. The data cable was manufactured by Tyco Electronics using custom UL rated cable manufactured by General Wire Products. The HV and LV cable assemblies, which were manufactured at Jefferson Lab, were tested for continuity, isolation, and current leakage, which has been documented on individual travelers. The slow controls cables were measured for continuity, isolation and spot checked for current leakage.
> 
> A DSG note on the cables is posted on the DSG website:
> 
> https://www.jlab.org/div_dept/physics_division/dsg/notes/001-2014%20SVT%20cables.pdf
> 
> 
> 
> -- 
> Marc McMullen
> Detector Support Group
> 757-269-7738