[dsg-svt] HFCB layer thickness and HV clearance

[Marc McMullen]

Hi Yuri,

I have attached the layer stack up. The HV travels from the L1C to the 
hybrids on the VDDA/HV layer (copper layer 8 on stackup), copper layer 9 
is a ground/return layer. These layers are two layers of a DuPont AP8525 
core. This layer contains analog LV copper pours and HV traces.

The HV+ and analog LV are separated from each other by with HV- (which 
is tied to all returns). The HV+ clearance is 18mils.


Regards,

Marc

-------------- next part --------------
A non-text attachment was scrubbed...
Name: HFCB Vers 2 Stack Up.xlsx
Type: application/vnd.openxmlformats-officedocument.spreadsheetml.sheet
Size: 22739 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-svt/attachments/20170613/320e4951/attachment-0001.xlsx>