[dsg-svt] SVT coolant flow meter failure at 100% solenoid field

[Yuri Gotra]

Brian,

No, the outlet one is lower by 1 foot and is further away from the 
solenoid. Could you please pull up the HBI documentation on selection of 
this model of the flow meter, re-check the specs and find out what could 
cause such failure. We need to figure out whether there is a safe place 
on the cart for normal operation of these flow meters. They could only 
be moved 2 feet back and 2 feet down if they stay on the cart. We could 
also consider a separate support cart for the chiller and the flow 
meters which would be located behind the CVT cart. Thank you


On 11/8/17 9:11 PM, Brian Eng wrote:
> Is the outlet flow meter the one that is closer to the bore?
>
> Maybe it just need to be moved further away from the fringe field? Could either go upstream or closer to the floor.
>
> Seems odd that only one of them failed, since they're identical models.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: gotra.vcf
Type: text/x-vcard
Size: 102 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_svt/attachments/20171109/7d48ed5f/attachment-0002.vcf>