[dsg-svt] External pump relay is off

[Tyler Lemon]

Hello, 

Mindy has repaired the cable. 

We verified that the pump's relay box output is enabled using the relay box's LED indicator and also verified that everything was fine on the LabVIEW User Interface. 

Best regards, 
Tyler 


From: "Peter Bonneau" <bonneau at jlab.org> 
To: "dsg-svt" <dsg-svt at jlab.org> 
Sent: Thursday, September 13, 2018 8:19:21 AM 
Subject: Re: [dsg-svt] External pump relay is off 

Mindy has found the parts needed to repair this cable. 

Mindy and Tyler are going to hall now to repair it and to test the pump 
relay interlock. 

During the repair, the power to the cRio crate may need to be turned off 
which will trip the Mpod & chiller interlocks. 




On 9/11/2018 3:15 PM, Yuri Gotra wrote: 
> 
> Thank you Tyler, 
> 
> The pump turned off before we started work on the new chiller. 
> Probably the techs who worked on the purging lines stepped on it. 
> 
> 


_______________________________________________ 
dsg-svt mailing list 
dsg-svt at jlab.org 
https://mailman.jlab.org/mailman/listinfo/dsg-svt 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_svt/attachments/20180913/6ebf76c0/attachment-0002.html>