[dsg-hallb_svt] SVT testing

[Yuri Gotra]

Thank you Brian,


Calibrations of R1 and R2 are done, all modules are operational. SVT 
power is off, I started warming it up to room temperature. Tomorrow 
morning we will proceed with Region 3 integration. The goal is to finish 
cabling tomorrow and run calibrations of the whole SVT. If all goes well 
I will schedule the survey and we'll go towards CVT integration.

As a backup solution for R2S13 temperature cable it could be replaced 
with a spare one from Region 4. If you need access to the module, you 
can remove the plastic cover. SVT will be warm soon and there won't be a 
condensation issue.


On 5/6/21 6:54 PM, Brian Eng wrote:
> We haven't located the crimper for that cable yet, but as other DSG 
> members come on-site they have been looking.
>
> I'll try seeing if I can narrow down if it is the cable or filter for 
> the issues with SB1 later tonight.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_svt/attachments/20210506/746c7bf5/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: gotra.vcf
Type: text/x-vcard
Size: 102 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_svt/attachments/20210506/746c7bf5/attachment.vcf>