[Dsg-hallc_controls] 1T+ Magnet

[Brian Eng]

Hi Joe,

We went by the lab a little while ago to see what networking was available. We tried plugging the NMR into a free port, but it couldn't get online.

I'm still waiting to hear back from the CC to see what subnets are there in that building (device is currently on the Hall C development subnet).

If I don't hear back in time we can still use the USB interface tomorrow to see if the probe will manage to get a lock on the field.

However, the main goal was to be able to programmatically talk to the NMR over ethernet.

--
Brian Eng
Detector Support Group
757-269-6018

> On Aug 3, 2018, at 5:02 PM, Joseph Meyers <meyers at jlab.org> wrote:
> 
> Building 36 across from the South Access bldg (on-site) room 109 (far right side looking at bldg). We are a RCA so wear your dosimeter.  
> 
> We are on the JLab network but feel free to come by before hand to check. Shop # is x6095. 
> 
> Joe Meyers
> 
>> On Aug 3, 2018, at 3:44 PM, Brian Eng <beng at jlab.org> wrote:
>> 
>> Let's shoot for Wed morning. What building/room number is it?
>> 
>> Is it somewhere I can access beforehand to see what networking is available? The NMR is currently on the Hall C development subnet.
>> 
>> ----- Original Message -----
>>> From: "Joseph Meyers" <meyers at jlab.org>
>>> To: "Brian Eng" <beng at jlab.org>
>>> Cc: "dsg-hallc controls" <dsg-hallc_controls at jlab.org>
>>> Sent: Friday, August 3, 2018 3:40:15 PM
>>> Subject: Re: 1T+ Magnet
>> 
>>> We got it past 1.2T so it should lock. We're in the shop next week Wednesday and
>>> Thursday mornings so let me know what day works for you.
>>> 
>>> Joe M.