[Dsg-halld_plc] [New Logentry] Follow-up Re: Inoperative magnetometer reading partially troubleshot

[Hovanes Egiyan]

They do have a confirmation dialog menus. I do not know what these 
button does, they probably

write 1 to HallD-PXI:Control:Zero or HallD-PXI:Control:Reset .

But if in doubt, we should check it.

Hovanes.



On 03/13/2018 07:48 AM, Brian Eng wrote:
> On the PXI voltage taps CSS screen there's buttons to either calibrate or zero the offsets in the lower left area.
>
> I'm hoping there's at least a modal dialog to confirm the action like when you click the stop DAQ button, but I didn't want to click either of them quite yet.
>
> ----- Original Message -----
>> From: "Timothy Whitlatch" <whitey at jlab.org>
>> To: beng at jlab.org
>> Cc: "Eugene Chudakov" <gen at jlab.org>, "Tom Carstens" <carstens at jlab.org>, "Beni Zihlmann" <zihlmann at jlab.org>, "Scot
>> Spiegel" <spiegel at jlab.org>, "Josh" <jfoyles at jlab.org>, "dsg-halld plc" <dsg-halld_plc at jlab.org>
>> Sent: Tuesday, March 13, 2018 7:32:20 AM
>> Subject: Re: [New Logentry] Follow-up Re: Inoperative magnetometer reading partially troubleshot
>> Thanks Brian.
>>
>> What "button" are you referring to?
>>
>>
>> _______________________________________________
>> Dsg-halld_plc mailing list
>> Dsg-halld_plc at jlab.org
>> https://mailman.jlab.org/mailman/listinfo/dsg-halld_plc

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halld_magnets/attachments/20180313/d2a96503/attachment-0002.html>