[Dsg-halld_plc] Epics Web -Hall D Solenoid MPS Interlock Screen

[Hovanes Egiyan]

Yes, we discussed that since the MPS control GUI showed back boxes.

They got removed by accident and we should wait until next IOC reboot.

Hovanes .


On 2/10/20 9:46 AM, Tyler Lemon wrote:
> Hi Hovanes,
>
> The MPS Interlock SUM bit is black on WEDM because its PV can't be found.
>
> Back in July 2019, the PVs "SOL:i:MPS_Status_Read_BOOL;0" and 
> "SOL:i:MPS_Status_Read_BOOL;1" were added to be able to parse the MPS 
> status array in WEDM, but when I use caget for those PVs, it returns 
> that with a channel connect time out.
>
> Could something have happened with IOC configurations that removed 
> these two PVs?
>
> Best regards,
> Tyler
> ------------------------------------------------------------------------
> *From:* Dsg-halld_plc <dsg-halld_plc-bounces at jlab.org> on behalf of 
> Hovanes Egiyan <hovanes at jlab.org>
> *Sent:* Wednesday, February 5, 2020 1:50 PM
> *To:* dsg-halld_plc at jlab.org <dsg-halld_plc at jlab.org>
> *Subject:* Re: [Dsg-halld_plc] Epics Web -Hall D Solenoid MPS 
> Interlock Screen
>
> Thanks Tyler,
>
> Hopefully we do not get to check it in action until this run is over.
>
> And I just noticed that "MPS Interlock SUM" is black on the WEDM GUI 
> and is green in CSS.
>
> Hovanes.
>
>
>
>
>
> On 2/5/20 12:04 PM, Tyler Lemon wrote:
>>
>> Hi Nick,
>>
>> I was able to change the "_1st" indicators to sets of rectangles 
>> whose visibility is based on their value. This should better 
>> replicate what's in CSS.
>>
>> I tested the logic for the rectangle visibility using a test PV and 
>> it worked fine. The real test would be to see if the WEDM matches the 
>> CSS if there is an interlock.
>>
>> If you or anyone else notices that the indicators don't match or are 
>> not what they should if there is an interlock, I can look then to 
>> correct it.
>>
>> Best regards,
>> Tyler
>>
>>
>> ------------------------------------------------------------------------
>> *From:* Nicholas Sandoval <sandoval at jlab.org> <mailto:sandoval at jlab.org>
>> *Sent:* Wednesday, January 29, 2020 9:05 AM
>> *To:* Tyler Lemon <tlemon at jlab.org> <mailto:tlemon at jlab.org>
>> *Subject:* Epics Web -Hall D Solenoid MPS Interlock Screen
>> Hi Tyler,
>>
>> Would you be able to change how the "_1st" indicators are displayed 
>> on the interlock screen
>>  0 =Green  (as it is)
>>  1=RED
>>  >1=Yellow
>>
>> Thanks and Best Regards,
>> Nick
>>
>> _______________________________________________
>> Dsg-halld_plc mailing list
>> Dsg-halld_plc at jlab.org  <mailto:Dsg-halld_plc at jlab.org>
>> https://mailman.jlab.org/mailman/listinfo/dsg-halld_plc
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halld_magnets/attachments/20200210/f3e8152e/attachment-0002.html>