[dsg-halld_magnets] [New Logentry] Solenoid PXI ADC modules calibrated

[campero at jlab.org]

Logentry Text:
--
Eight channels for each of the eight PXI ADC modules used for the VTs readout of the Solenoid have been successfully tested and calibrated.
All modules passed the self-calibration test with no issues.
The external calibration for each module was performed using a Krohn-Hite Model 523 precision DC source and a specific LabVIEW program developed using the procedure recommended by NI.
Screenshots for each module test is shown below.
After completion of the test, The PXI controller was rebooted to run the startup application and reestablish the communications. The PXI is back up and running as normal.

ADC-Slot 2 Results [figure:1] 
ADC-Slot 3 Results [figure:2]
ADC-Slot 4 Results [figure:3]
ADC-Slot 5 Results [figure:4]
ADC-Slot 6 Results [figure:5]
ADC-Slot 7 Results [figure:6]
ADC-Slot 8 Results [figure:7]
ADC-Slot 9 Results [figure:8]

   
    

---

This is a plain text email for clients that cannot display HTML.  The full logentry can be found online at https://logbooks.jlab.org/entry/4176347
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halld_magnets/attachments/20230908/92feb01b/attachment.html>