[dsg-hdice] RF signal problem

[Mindy Leffel]

I repaired the cable and put it on Amanda's desk.


On 11/21/2016 2:05 PM, Xiangdong Wei wrote:
> Amanda,
>
> Yes, I did fixed that problem for now. The BNC end of the reference 
> cable was broken---there was a discontinuity between the braided outer 
> conductor and the outside of the cable end. I replaced it with an old 
> shorter cable, which is a little bit too short. Whence the broken 
> cable is fixed, we need to put it back.
>
> Would you please ask Mindy to take care of the cable soon? It is 
> hanging on top of the NMR rack.
>
> Thanks,
>
> Xiangdong
>
> /*Xiangdong Wei*/
>
> //x-5266
>
>
> ------------------------------------------------------------------------
> *From: *"Amanda Hoebel" <amandah at jlab.org>
> *To: *dsg-hdice at jlab.org
> *Sent: *Monday, November 21, 2016 1:34:39 PM
> *Subject: *[dsg-hdice] RF signal problem
>
> Hi Xiangdong,
>
> I stopped by the lab and noticed the "unlock" and "out of range" 
> indicators on the lock-in amplifier are no longer lit. Did you fix the 
> problem you had with the RF signal?
>
> Regards,
> Amanda
> _______________________________________________
> dsg-hdice mailing list
> dsg-hdice at jlab.org
> https://mailman.jlab.org/mailman/listinfo/dsg-hdice
>
>
> _______________________________________________
> dsg-hdice mailing list
> dsg-hdice at jlab.org
> https://mailman.jlab.org/mailman/listinfo/dsg-hdice

-- 
Mindy Leffel
Detector Support Group (DSG)

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hdice/attachments/20161122/d28126a2/attachment-0002.html>