[dsg-hdice] Windows 7 Computer

[Michael Lowry]

I am still confused about where your suggested transferrable license currently resides.  It is not the license now on HDiceEXP (1), since that is a network license which we want to avoid.  During G14 (2011-2012), we had a standalone license supplied by Worth but that was lost when the machine was upgraded from XP to Win7 and the present network license was installed on the new LabView copy.

Mike

________________________________
From: Brian Eng <beng at jlab.org>
Sent: Monday, November 25, 2019 1:57 PM
To: Michael Lowry <mlowry at jlab.org>
Cc: dsg-hdice at jlab.org <dsg-hdice at jlab.org>
Subject: Re: Windows 7 Computer

I don't think a new license is required, probably just need to transfer it.

On Nov 25, 2019 12:22, Michael Lowry <mlowry at jlab.org> wrote:
So, as I understand it a new license needs to be acquired.  Could you obtain a quote and write up the PR?

Mike

________________________________
From: Brian Eng <beng at jlab.org>
Sent: Thursday, November 21, 2019 5:08 PM
To: Michael Lowry <mlowry at jlab.org>
Cc: dsg-hdice at jlab.org <dsg-hdice at jlab.org>
Subject: Re: Windows 7 Computer

Hi Mike,

I installed LabVIEW 2019, but since I can't activate it I've gone as far as I can.

That computer ID is for the new computer so none of the other ones should have it.

Whoever activated that license needs to get a code based on that computer ID.

Since I'm going on vacation starting week someone else from the DSG will help with getting any additional software on the server.

> On Nov 21, 2019, at 4:57 PM, Michael Lowry <mlowry at jlab.org> wrote:
>
> Hi Brian,
>
>    How are things coming.  I did check the NI license manager on all our copies of Labview and none of them have that computer ID.
> Note that the current license (Z71M58668) is a network license.  Do not know at what point that happened but want to go back to standalone.
>
> Mike Lowry
> From: Brian Eng <beng at jlab.org>
> Sent: Tuesday, November 12, 2019 5:13 PM
> To: Michael Lowry <mlowry at jlab.org>
> Subject: Re: Windows 7 Computer
>
> Hi Mike,
>
> I think whoever activated the previous serial number (Z71M58668) needs to do it again.
>
> http://delta.ni.com/nilg-activate/jsp/customer_activate_details.jsp
>
> Computer ID: V66M-8ZGX-DJXM-VQV9
>
> Since I need an activation code if I don't use the network license.
>
> ________________________________________
> From: Michael Lowry <mlowry at jlab.org>
> Sent: Monday, September 16, 2019 8:53 AM
> To: Brian Eng
> Subject: Re: Windows 7 Computer
>
> HDiceEXP (InBeam Cryostat control) is running LabVIEW2014, Service Pack 1, Version 14.0.1 (32 bit)
>              License Number Z71M58668
>
> Mike Lowry
>
> ________________________________
> From: Brian Eng <beng at jlab.org>
> Sent: Friday, September 13, 2019 10:34 AM
> To: Michael Lowry <mlowry at jlab.org>
> Subject: Re: Windows 7 Computer
>
> If all you need is LabVIEW and the related add-ons to communicate with a RT crate there should be no problems.
>
> Do you know which version of LV it is currently running?
>
> > On Sep 13, 2019, at 10:32 AM, Michael Lowry <mlowry at jlab.org> wrote:
> >
> > The status of the IBC computer is that it is running Win7 but does not meet the hardware requirements
> > for Win 10.  We have submitted  signed req. and e-quote for new Win10 rack machine and are waiting for buyer to place order.  When new machine comes in, it will need LabView including RealTime for controlling the RealTime crate connected via USB.  Time frame is uncertain since we do not have a delivery date for the computer.  It is complicated by the pumping skid location in UITF Cave 2, which is scheduled to be locked
> > up the 2nd half of October for machine tests.  For reference, the Hostname is HDiceEXP and hdice user
> > account has admin privileges.
> >
> > Mike Lowry
> >
> >
> > From: Brian Eng <beng at jlab.org>
> > Sent: Friday, September 13, 2019 9:55 AM
> > To: Michael Lowry <mlowry at jlab.org>
> > Subject: Windows 7 Computer
> >
> > Hi Mike,
> >
> > Wei mentioned there was another computer (I think for the IBC?) that needs to get updated to Windows 10 at some point.
> >
> > Could you let me know when you have time available that we could look at it to see what software it needs?
> >
> > Thanks


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hdice/attachments/20191125/28c9ec3a/attachment-0002.html>