[dsg-hdice] Boxcar Averager Trial Dates

Tue Oct 13 14:29:13 EDT 2020

Hi Tom,

Thanks for letting me know. Glad to hear the activation went through without issues.

I'll take a look this afternoon to figure out the boxcar averager to save time when the cables are reconnected.

Thanks,
Tyler
________________________________
From: thomaso at jlab.org <thomaso at jlab.org>
Sent: Tuesday, October 13, 2020 2:27 PM
To: Tyler Lemon <tlemon at jlab.org>
Cc: Xiangdong Wei <xwei at jlab.org>; thomaso at jlab.org <thomaso at jlab.org>; Brian Eng <beng at jlab.org>; dsg-hdice at jlab.org <dsg-hdice at jlab.org>
Subject: Re: [dsg-hdice] Boxcar Averager Trial Dates

Hi Tyler,

The Boxcar Averager feature is now unlocked in LabOne.  A new target is
currently being condensed today in the production dewer, which requires
the NMR cables be disconnected.  If you are interested in checking out the
features without a target this afternoon, you are welcome.

I will let you know when the cables are reconnected and we are able to
actually take measurements.

Thanks,
Tom

> Hi Tom,
>
> That seems like a good plan to me, too, since it avoids any uncertainty
> about the access privileges all together.
>
> Thanks!
> Tyler
>
> ________________________________
> From: dsg-hdice <dsg-hdice-bounces at jlab.org> on behalf of Xiangdong Wei
> <xwei at jlab.org>
> Sent: Monday, October 12, 2020 1:22:07 AM
> To: thomaso at jlab.org <thomaso at jlab.org>; Brian Eng <beng at jlab.org>
> Cc: dsg-hdice at jlab.org <dsg-hdice at jlab.org>
> Subject: Re: [dsg-hdice] Boxcar Averager Trial Dates
>
> Dear all,
>
> Sounds good to me.
>
> Thank,
>
> Xiangdong
> ________________________________
> From: dsg-hdice <dsg-hdice-bounces at jlab.org> on behalf of thomaso at jlab.org
> <thomaso at jlab.org>
> Sent: Sunday, October 11, 2020 9:55 AM
> To: Brian Eng <beng at jlab.org>
> Cc: dsg-hdice at jlab.org <dsg-hdice at jlab.org>
> Subject: Re: [dsg-hdice] Boxcar Averager Trial Dates
>
> I emailed Ed about the situation and he offered a different solution.  He
> suggested connecting my personal laptop to the Lock-In amplifier with the
> USB cable.  I could let him use my laptop to activate the device features.
> Once he activates the features, any PC that connects to the device will
> automatically have access to the new features.
>
> In this case, the earliest we could start the trial would be Tuesday
> afternoon.
>
> Tyler, I can make sure you have as much access to the device as possible
> to explore the new features before you go on vacation.  I can check them
> out in the evening and on the weekend when you are away.
>
> I will contact Ed again and get back with an update.
>
> Thanks,
> Tom
>
>
>
>
>
>> Unless it is something already built in I don't think it's allowed, i.e.
>> installing TeamViewer software.
>>
>> I haven't seen anything that says you couldn't do a screen share and
>> give
>> someone else control (since Teams seems to at least have the possibility
>> of doing that), but you might want to check with the CC to be sure.
>>
>> ________________________________
>> From: dsg-hdice <dsg-hdice-bounces at jlab.org> on behalf of Tyler Lemon
>> <tlemon at jlab.org>
>> Sent: Friday, October 9, 2020 3:47 PM
>> To: thomaso at jlab.org <thomaso at jlab.org>
>> Cc: dsg-hdice at jlab.org <dsg-hdice at jlab.org>
>> Subject: Re: [dsg-hdice] Boxcar Averager Trial Dates
>>
>> Hi Tom,
>> I'd be available anytime except for 11:00 - 12:00 for the Teams meeting
>> with Ed.
>>
>> Peter and Brian,
>> Just to maybe head off a problem, is using Teams to have an non-JLab
>> user
>> access a JLab PC allowable?
>>
>> Tom, if the remote control aspect is not okay, would it be sufficient
>> for
>> Ed to remotely view my screen while I type and control the PC connected
>> to
>> the lock-in amplifier?
>>
>> Tyler
>> ________________________________
>> From: thomaso at jlab.org <thomaso at jlab.org>
>> Sent: Friday, October 9, 2020 3:36 PM
>> To: Tyler Lemon <tlemon at jlab.org>
>> Cc: thomaso at jlab.org <thomaso at jlab.org>; dsg-hdice at jlab.org
>> <dsg-hdice at jlab.org>
>> Subject: Re: [dsg-hdice] Boxcar Averager Trial Dates
>>
>> Hi Tyler,
>>
>> I will ask Ed if we can start Monday.  He mentioned in his last email
>> that to start the trial "This will require a computer connected to the
>> instrument that I can gain remote control over through teamviewer to
>> activate the option."
>>
>> I won't have access to a PC connected to the Lock-In amplifier until
>> Tuesday.  Tyler, would you have access to a PC Monday?  If so, would you
>> have time on Monday to have a virtual meeting with Ed so he can activate
>> the trial?
>>
>> Thanks,
>> Tom
>>
>>> Hi Tom,
>>>
>>> It seems like the best option would be to see if the trial period could
>>> start on Monday. That way there'd be enough time for you all in HDice
>>> to
>>> look into it, too.
>>>
>>> I do not think it would be possible to write a program for the boxcar
>>> averager during the one week trial period. Using the boxcar averager
>>> during the trial period would have to be done through "manual" set up
>>> like
>>> what was shown in the demo.
>>>
>>> To not waste any part of the trial period, it might be a good idea to
>>> also
>>> talk to Ed and verify the best way to set up the signals for the boxcar
>>> averager. If I remember correctly from the demo, the signal detected
>>> from
>>> the lock-in amplifier would need to be output through one of the Zurich
>>> lock-in amplifier's auxiliary outputs and then into the boxcar averager
>>> input.
>>>
>>> Tyler
>>> ________________________________
>>> From: thomaso at jlab.org <thomaso at jlab.org>
>>> Sent: Friday, October 9, 2020 2:28 PM
>>> To: Tyler Lemon <tlemon at jlab.org>
>>> Subject: Re: [dsg-hdice] Boxcar Averager Trial Dates
>>>
>>> Hi Tyler,
>>>
>>> I was speaking to Xiangdong today about our schedules.  We will be
>>> starting Run 2 of the experiment by the 26th.  He believes him and I
>>> will
>>> be too busy with running the experiment at UITF to be able to work on
>>> the
>>> Boxcar Averager at this point.
>>>
>>> He came up with two suggestions.  First would be to activate the trial
>>> possibly today (or more realistically Monday) if you have time to start
>>> checking out the Boxcar features before your vacation.
>>>
>>> The second option would be to start the trial on 10/26 when you are
>>> back.
>>> Xiangdong pointed out that if we wait until then, it wouldn't give us
>>> much
>>> time before we'd need the device for taking actual measurements. Also,
>>> Xiangdong said we would have to let the DSG take over working with the
>>> Boxcar Averager since all our time will be devoted to Run 2 of the
>>> experiment. He wasn't sure how long you would need to investigate the
>>> device/LabOne, write a program, and test before needing to take actual
>>> measurements.
>>>
>>>
>>> Let me know what you think about the situation when you have a chance.
>>>
>>>
>>> Thanks,
>>> Tom
>>>
>>>
>>>> Hi Tom,
>>>>
>>>> I will be on vacation from 10/17 through 10/25, so would it be
>>>> possible
>>>> to
>>>> have trial period starting 10/26?
>>>>
>>>> Tyler
>>>> ________________________________
>>>> From: dsg-hdice <dsg-hdice-bounces at jlab.org> on behalf of
>>>> thomaso at jlab.org
>>>> <thomaso at jlab.org>
>>>> Sent: Friday, October 9, 2020 12:15 AM
>>>> To: dsg-hdice at jlab.org <dsg-hdice at jlab.org>
>>>> Subject: [dsg-hdice] Boxcar Averager Trial Dates
>>>>
>>>> Hi Tyler,
>>>>
>>>> I'm working with Ed, from Zurich, to schedule the 1 week trial for the
>>>> Boxcar Averager.  I was thinking of asking the trial to be from
>>>> Wednesday
>>>> October 14th to Wednesday October 21st given the HDice schedule.
>>>>
>>>> However I wanted to check with you and your group first to see if that
>>>> time frame works with your schedules should you want to try out the
>>>> new
>>>> features?
>>>>
>>>> Thanks,
>>>> Tom
>>>>
>>>> _______________________________________________
>>>> dsg-hdice mailing list
>>>> dsg-hdice at jlab.org
>>>> https://mailman.jlab.org/mailman/listinfo/dsg-hdice
>>>>
>>>
>>>
>>>
>>
>>
>>
>
>
> _______________________________________________
> dsg-hdice mailing list
> dsg-hdice at jlab.org
> https://mailman.jlab.org/mailman/listinfo/dsg-hdice
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hdice/attachments/20201013/a1ff8fa6/attachment-0001.html>