[dsg-hdice] HDice oxford power supply control VIs

[Tyler Lemon]

Hi Xiangdong,

I logged on and transferred the new dual Oxford iPS 120 control VI.

However, I was not able to run it since I do not know the GPIB address of the second power supply.

I was able to test using the original power supply control VI that the first supply's GPIB address is 25, but none of the other addressed listed on the PC worked for the second power supply.

I've logged back off of HDiceNMR2 so you can log on to it if needed.

Tyler
________________________________
From: dsg-hdice <dsg-hdice-bounces at jlab.org> on behalf of Tyler Lemon <tlemon at jlab.org>
Sent: Tuesday, October 13, 2020 5:17 PM
To: Xiangdong Wei <xwei at jlab.org>; dsg-hdice at jlab.org <dsg-hdice at jlab.org>
Subject: Re: [dsg-hdice] HDice oxford power supply control VIs

Hi Xiangdong,

I can transfer the VI a little after 6:30pm or tomorrow at 8:30am.

All I’ll do is copy the VI, run it to see if everything initializes okay, make sure the power supplies at least go to ~0.5 A, and then stop everything.

Tyler

________________________________
From: Xiangdong Wei <xwei at jlab.org>
Sent: Tuesday, October 13, 2020 5:07:59 PM
To: Tyler Lemon <tlemon at jlab.org>; dsg-hdice at jlab.org <dsg-hdice at jlab.org>
Subject: Re: HDice oxford power supply control VIs

Hi Tyler,

When can you do it? I will logout in 15 minutes so you can logon. Please don't put more than 1 amp in any of the supply. Let me know after you finish, I'll test it tomorrow.

Thanks,

Xiangdong
________________________________
From: dsg-hdice <dsg-hdice-bounces at jlab.org> on behalf of Tyler Lemon <tlemon at jlab.org>
Sent: Tuesday, October 13, 2020 4:44 PM
To: dsg-hdice at jlab.org <dsg-hdice at jlab.org>
Subject: [dsg-hdice] HDice oxford power supply control VIs

Hi Xiangdong,

I do have new a version to try for the Oxford power supply VIs.

I would have to log on to HDiceNMR2 to set it up, is that PC available?

Tyler

________________________________
From: Xiangdong Wei <xwei at jlab.org>
Sent: Tuesday, October 13, 2020 4:35 PM
To: Tyler Lemon <tlemon at jlab.org>; thomaso at jlab.org <thomaso at jlab.org>
Cc: dsg-hdice at jlab.org <dsg-hdice at jlab.org>
Subject: Re: [dsg-hdice] Found a built in averaging and referencing feature on sweep tab of Zurich lock-in amplifier

Hi Tyler,

Do you have any new version of VIs for Oxford IPS? We may have a time to install and check.

Thanks,

Xiangdong
________________________________

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hdice/attachments/20201013/04d42036/attachment.html>