[dsg-hdice] Found a built in averaging and referencing feature on sweep tab of Zurich lock-in amplifier

[thomaso at jlab.org]

Hi Tyler,

Thanks for sharing this with us!  I will check it out shortly.

-Tom

> Hi Xiangdong and Tom,
>
> After our meeting, I ran a test sweep with the Zurich lock-in amplifier.
> While it was running I was looking around the sweep tab's options and
> found a sweep mode that lets you set a number of samples to take at each
> frequency during a sweep. I also saw on the "History" tab in the sweep tab
> there is a "Reference" option. These two options seem to result in what we
> are trying to do with the fsNMR program.
>
> So you all can look at it, attached are three screenshots with what to
> click along with the steps below.
>
> screenshot1.jpg
> 1. Go to settings tab on right of sweep tab
> 2. use drop down menu to change application to "Parameter Sweep Averaged"
>
> screenshot2.jpg
> 3. Click "Advanced" button on settings tab
> 4. Enter averaging settings
>
> At this point you'd run a sweep as normal. For the reference feature:
>
> screenshot3.jpg
> 5. Go to history tab on sweep tab
> 6. select result to use as reference
> 7. click "Reference" button
> 8. Click button to toggle reference "on"
>
> The next sweep you'd run will be referenced to whatever you selected in
> step 6. An example result after averaging is in the amplitude plot for
> screenshot1.jpg and in the attached CSV file.
>
> I look forward to hearing what you think about and find with these
> options.
>
> -Tyler
>
>
>
> _______________________________________________
> dsg-hdice mailing list
> dsg-hdice at jlab.org
> https://mailman.jlab.org/mailman/listinfo/dsg-hdice
>