[dsg-hdice] Meeting with Zurich Rep for Boxcar Averager Demonstration

[Tyler Lemon]

Hi Tom,

Thanks for arranging the meeting with Zurich. We do have a few questions on the Boxcar Averager and the lock-in amplifier

Boxcar Averager questions:

1.  Is Boxcar Averager a separate device or is it just a software activation on the Zurich lock-in amplifier?


2.  Is the Boxcar Averager applicable to the signals seen for NMR measurements?

    2a. Seems like from documentation it is more suited for fast, kHz peaks    where you know the period between peaks.
    2b. Can we see an example with slower signals?


General lock-in amplifier questions:

1. With the “Reference” options, the manual says that new data is divided by reference data. Is there a configuration where we can get it to do something else, like subtract, the reference signal from the new signal?


2.   Is there a way to do more complicated math using sweep results?

    2a. We know you can extract information of signal’s peak, can that result then be used as one of the components of a calculation?


3.  What is the preferred programming interface for lock-in amplifier (LabVIEW, Python, other)?

    3a. What interface is LabOne using?


Thanks,
Tyler
________________________________
From: thomaso at jlab.org <thomaso at jlab.org>
Sent: Tuesday, September 22, 2020 10:31 AM
To: Tyler Lemon <tlemon at jlab.org>
Cc: thomaso at jlab.org <thomaso at jlab.org>; dsg-hdice at jlab.org <dsg-hdice at jlab.org>
Subject: Re: Meeting with Zurich Rep for Boxcar Averager Demonstration

Good Morning,

I am in the process of scheduling the boxcar averager demo with one of
Zurich's app scientists.  Before setting a time next week, I was asked to
put together a list of any questions or topics we wish to discuss so the
person has some time to prepare accordingly.

If you have any questions regarding LabOne, the Lock-In amplifier, or
boxcar averager, please let me know.

Best Regards,
Tom

> Hi Tom,
>
> I would be interested in attending the virtual meeting and I think a few
> others in DSG are, too.
>
> Once you have the meeting info, could you forward it to the DSG-HDice
> mailing list so anyone who wants to can attend?
>
> Thanks!
>
> Tyler
>
> ________________________________
> From: thomaso at jlab.org <thomaso at jlab.org>
> Sent: Monday, September 21, 2020 4:08:17 PM
> To: Tyler Lemon <tlemon at jlab.org>
> Cc: dsg-hdice at jlab.org <dsg-hdice at jlab.org>
> Subject: Meeting with Zurich Rep for Boxcar Averager Demonstration
>
> Good Afternoon,
>
> I spoke with Jorge Medina, the Zurich representative, regarding the Boxcar
> Averager option for the Zurich Lock-In amplifier.  He suggested setting up
> a virtual meeting with us to give us a demonstration of this feature and
> to answer any questions we have with the Lock-In amplifier.
>
> The HDice group is busy this week with Run 1 of the eHD experiment.  We
> are going to request the meeting be some time next week (the week of the
> 28th).  If you are interested in joining the meeting, let me know.  I will
> send out more information on the meeting later.  Thanks!
>
>
> Thanks,
> Tom O'Connell
>
>


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hdice/attachments/20200925/56612156/attachment.html>