<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=Windows-1252">
<style type="text/css" style="display:none;"> P {margin-top:0;margin-bottom:0;} </style>
</head>
<body dir="ltr">
<div style="font-family: Calibri, Arial, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
Hi Xiangdong,</div>
<div style="font-family: Calibri, Arial, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
<br>
</div>
<div style="font-family: Calibri, Arial, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
After talking to Peter on the phone and in a DSG status meeting, I was able to identify the cause of the issue with running both Power Oxford Supply controls programs at the same time. To resolve the issues, I combined the control of both power supplies into
one VI with structuring to prevent the PC from trying to talk to the two power supplies at the same time.<br>
</div>
<div style="font-family: Calibri, Arial, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
<br>
</div>
<div style="font-family: Calibri, Arial, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
Since NMR rack 2 is "locked down" in the UITF, we'd have to wait until the next time there is an access or something to where we could remotely log in to the PC to add the new VI to the LabVIEW project.</div>
<div style="font-family: Calibri, Arial, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
<br>
</div>
<div style="font-family: Calibri, Arial, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
Tyler<br>
</div>
<div id="appendonsend"></div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<hr tabindex="-1" style="display:inline-block; width:98%">
<div id="divRplyFwdMsg" dir="ltr"><font style="font-size:11pt" face="Calibri, sans-serif" color="#000000"><b>From:</b> Dsg-internal <dsg-internal-bounces@jlab.org> on behalf of Peter Bonneau <bonneau@jlab.org><br>
<b>Sent:</b> Friday, September 25, 2020 9:49 AM<br>
<b>To:</b> dsg-internal <dsg-internal@jlab.org><br>
<b>Subject:</b> [Dsg-internal] Fw: [dsg-hdice] Found a built in averaging and referencing feature on sweep tab of Zurich lock-in amplifier</font>
<div> </div>
</div>
<div dir="ltr">
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
Tyler,</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
As I mentioned on the phone, the two power supply Vi's need arbitration to work on multiple supplies due to limitations in GPIB as mentioned in this forum: <a href="https://forums.ni.com/t5/LabVIEW/can-i-read-GPIB-instruments-in-paralel/td-p/1124427?profile.language=en">https://forums.ni.com/t5/LabVIEW/can-i-read-GPIB-instruments-in-paralel/td-p/1124427?profile.language=en</a><br>
</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
We can either:</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
1) Use our rotation of target polarization program in manual mode. This program has arbitration for two supplies. You'll need to implement the voltage readback and add this program and supporting VI's to the project file.<br>
</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
2) Have them use another usb-GPIB controller and run the two VISA power supply programs.
<br>
</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div id="x_appendonsend"></div>
<hr tabindex="-1" style="display:inline-block; width:98%">
<div id="x_divRplyFwdMsg" dir="ltr"><font style="font-size:11pt" face="Calibri, sans-serif" color="#000000"><b>From:</b> dsg-hdice <dsg-hdice-bounces@jlab.org> on behalf of Xiangdong Wei <xwei@jlab.org><br>
<b>Sent:</b> Wednesday, September 23, 2020 7:09 PM<br>
<b>To:</b> Tyler Lemon <tlemon@jlab.org>; thomaso@jlab.org <thomaso@jlab.org><br>
<b>Cc:</b> dsg-hdice@jlab.org <dsg-hdice@jlab.org><br>
<b>Subject:</b> Re: [dsg-hdice] Found a built in averaging and referencing feature on sweep tab of Zurich lock-in amplifier</font>
<div> </div>
</div>
<div dir="ltr">
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
Hi Tyler,</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
The Main2.vi failed to work this morning. Again I could run both VIs separately, but not together. When 2 power supplies were linked by a GPIB cable, The Main2.vi always failed to run. Main.vi only failed after I tried to run Main2.</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
I removed the GPIB cable between the supplies for today's run.</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
Any thought?</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
Thanks,</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
Xiangdong</div>
<div id="x_x_appendonsend"></div>
<hr tabindex="-1" style="display:inline-block; width:98%">
<div id="x_x_divRplyFwdMsg" dir="ltr"><font style="font-size:11pt" face="Calibri, sans-serif" color="#000000"><b>From:</b> dsg-hdice <dsg-hdice-bounces@jlab.org> on behalf of Xiangdong Wei <xwei@jlab.org><br>
<b>Sent:</b> Tuesday, September 22, 2020 2:29 PM<br>
<b>To:</b> Tyler Lemon <tlemon@jlab.org>; thomaso@jlab.org <thomaso@jlab.org><br>
<b>Cc:</b> dsg-hdice@jlab.org <dsg-hdice@jlab.org><br>
<b>Subject:</b> Re: [dsg-hdice] Found a built in averaging and referencing feature on sweep tab of Zurich lock-in amplifier</font>
<div> </div>
</div>
<div dir="ltr">
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
Hi Tyler,</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
Good news: The GPIB cable which I used to connect the 2 Oxford power supplies was broken. Since I replaced it this morning, both VIs have been used to drive the IBC Main and Transfer Magnets in the same time.</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
Thanks,</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
Xiangdong</div>
<div id="x_x_x_appendonsend"></div>
<hr tabindex="-1" style="display:inline-block; width:98%">
<div id="x_x_x_divRplyFwdMsg" dir="ltr"><font style="font-size:11pt" face="Calibri, sans-serif" color="#000000"><b>From:</b> dsg-hdice <dsg-hdice-bounces@jlab.org> on behalf of Xiangdong Wei <xwei@jlab.org><br>
<b>Sent:</b> Monday, September 21, 2020 4:45 PM<br>
<b>To:</b> Tyler Lemon <tlemon@jlab.org>; thomaso@jlab.org <thomaso@jlab.org><br>
<b>Cc:</b> dsg-hdice@jlab.org <dsg-hdice@jlab.org><br>
<b>Subject:</b> Re: [dsg-hdice] Found a built in averaging and referencing feature on sweep tab of Zurich lock-in amplifier</font>
<div> </div>
</div>
<div>
<div>Hi Tyler,</div>
<div><br>
</div>
<div>Thank you for fast responding. I didn’t reconfigure the rack2 connections, only used a GPIB cable to connect both power supplies. In principle, the connections were the same as your drawing (the adapter is on the lock-in).</div>
<div><br>
</div>
<div>I did use the front panel to set the GPIB address, following the Oxford manual.</div>
<div><br>
</div>
<div>What I didn’t do was checking if the cable was good or not. I’ll look for another one and check again. (The cave is locked out now)</div>
<div><br>
</div>
<div>Thanks,</div>
<div><br>
</div>
<div>Xiangdong </div>
<hr tabindex="-1" style="display:inline-block; width:98%">
<div id="x_x_x_x_divRplyFwdMsg" dir="ltr"><font style="font-size:11pt" face="Calibri, sans-serif" color="#000000"><b>From:</b> Tyler Lemon <tlemon@jlab.org><br>
<b>Sent:</b> Monday, September 21, 2020 3:55 PM<br>
<b>To:</b> Xiangdong Wei <xwei@jlab.org>; thomaso@jlab.org <thomaso@jlab.org><br>
<b>Cc:</b> dsg-hdice@jlab.org <dsg-hdice@jlab.org><br>
<b>Subject:</b> Re: [dsg-hdice] Found a built in averaging and referencing feature on sweep tab of Zurich lock-in amplifier</font>
<div> </div>
</div>
<div dir="ltr">
<div dir="ltr">
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<meta content="text/html; charset=Windows-1252">
</div>
<div dir="ltr">
<div></div>
<div>
<div>
<div style="direction:ltr">Hi Xiangdong,</div>
<div><br>
</div>
<div style="direction:ltr">Just to make sure everything is hooked up correctly and since I can’t see it in person, attached is a hand drawn sketch for how the set up needs to be.
</div>
<div><br>
</div>
<div style="direction:ltr">There needs to a a GPIB cable between the two power supplies. The USB-GPIB adapter needs to go on to the connector of one of the power supplies. In the sketch, it’s on P.S. # 1 but it could also be on P.S. # 2.
</div>
<div><br>
</div>
<div style="direction:ltr">If everything is already set up as in the sketch, it could be that the second power supply didn’t actually get assigned the new GPIB address. How did you set its address?</div>
<div><br>
</div>
<div style="direction:ltr">You would need to set it on the front panel of the power supply. In the attached manual, page 48 has the steps to get the power supply into the mode to set the address. Page 49 has the info on what to do to set the GPIB address.</div>
<div style="direction:ltr"><br>
</div>
<div style="direction:ltr">Tyler<br>
</div>
</div>
<div><br>
</div>
<div class="x_x_x_x_x_ms-outlook-ios-signature"></div>
</div>
</div>
<hr tabindex="-1" style="display:inline-block; width:98%">
<div id="x_x_x_x_x_divRplyFwdMsg" dir="ltr"><font style="font-size:11pt" face="Calibri, sans-serif" color="#000000"><b>From:</b> Xiangdong Wei <xwei@jlab.org><br>
<b>Sent:</b> Monday, September 21, 2020 3:33:03 PM<br>
<b>To:</b> Tyler Lemon <tlemon@jlab.org>; thomaso@jlab.org <thomaso@jlab.org><br>
<b>Cc:</b> dsg-hdice@jlab.org <dsg-hdice@jlab.org><br>
<b>Subject:</b> Re: [dsg-hdice] Found a built in averaging and referencing feature on sweep tab of Zurich lock-in amplifier</font>
<div> </div>
</div>
<div>
<div>Hi Tyler,</div>
<div><br>
</div>
<div>I set the GPIB address of the 2nd power supply to 29, and tried to connect to the 1st power supply via a glib cable between them. None of them work with this configuration—-both displayed errors. Either one works after disconnecting glib cable from another,
after selecting the correct GPIB address. How do I connect 2 supplies (with same bus address)? Do we need another GPIB-USB adapter?</div>
<div><br>
</div>
<div>Thanks,</div>
<div><br>
</div>
<div>Xiangdong </div>
<hr tabindex="-1" style="display:inline-block; width:98%">
<div id="x_x_x_x_x_x_divRplyFwdMsg" dir="ltr"><font style="font-size:11pt" face="Calibri, sans-serif" color="#000000"><b>From:</b> Tyler Lemon <tlemon@jlab.org><br>
<b>Sent:</b> Friday, September 18, 2020 9:05 AM<br>
<b>To:</b> Xiangdong Wei <xwei@jlab.org>; thomaso@jlab.org <thomaso@jlab.org><br>
<b>Cc:</b> dsg-hdice@jlab.org <dsg-hdice@jlab.org><br>
<b>Subject:</b> Re: [dsg-hdice] Found a built in averaging and referencing feature on sweep tab of Zurich lock-in amplifier</font>
<div> </div>
</div>
<div dir="ltr">
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
Hi Xiangdong,</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
Another point about controlling two power supplies from the same computer, the power supplies each need to have a unique GPIB address.</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
If the power supplies have previously been used for the rotation of target polarization program, they should already be set up this way.</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
-Tyler<br>
</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div id="x_x_x_x_x_x_x_appendonsend"></div>
<hr tabindex="-1" style="display:inline-block; width:98%">
<div id="x_x_x_x_x_x_x_divRplyFwdMsg" dir="ltr"><font style="font-size:11pt" face="Calibri, sans-serif" color="#000000"><b>From:</b> dsg-hdice <dsg-hdice-bounces@jlab.org> on behalf of Tyler Lemon <tlemon@jlab.org><br>
<b>Sent:</b> Friday, September 18, 2020 8:51 AM<br>
<b>To:</b> Xiangdong Wei <xwei@jlab.org>; thomaso@jlab.org <thomaso@jlab.org><br>
<b>Cc:</b> dsg-hdice@jlab.org <dsg-hdice@jlab.org><br>
<b>Subject:</b> Re: [dsg-hdice] Found a built in averaging and referencing feature on sweep tab of Zurich lock-in amplifier</font>
<div> </div>
</div>
<div dir="ltr">
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
Hi Xiangdong,</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
I added a second copy of the Oxford power supply VI to the fsNMR LabVIEW project.</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
Both copies are in a new folder in the project (see attached screenshot).</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
You only have to put the correct GPIB address into each of the programs and run each program to control both power supplies.</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
-Tyler<br>
</div>
<div id="x_x_x_x_x_x_x_x_appendonsend"></div>
<hr tabindex="-1" style="display:inline-block; width:98%">
<div id="x_x_x_x_x_x_x_x_divRplyFwdMsg" dir="ltr"><font style="font-size:11pt" face="Calibri, sans-serif" color="#000000"><b>From:</b> Xiangdong Wei <xwei@jlab.org><br>
<b>Sent:</b> Friday, September 18, 2020 8:31 AM<br>
<b>To:</b> thomaso@jlab.org <thomaso@jlab.org>; Tyler Lemon <tlemon@jlab.org><br>
<b>Cc:</b> dsg-hdice@jlab.org <dsg-hdice@jlab.org><br>
<b>Subject:</b> Re: [dsg-hdice] Found a built in averaging and referencing feature on sweep tab of Zurich lock-in amplifier</font>
<div> </div>
</div>
<div dir="ltr">
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
Hi Tyler,</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
After reviewing the UITF run plans, I just realized that we need to remotely drive 2 independent Oxford superconducting magnet power supplies at the same time, not just 1.</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
Would you please check to see if it is possible to add another VI to Rack 2 computer to realize this mode?</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
Thanks,</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
Xiangdong</div>
<div id="x_x_x_x_x_x_x_x_x_appendonsend"></div>
<hr tabindex="-1" style="display:inline-block; width:98%">
<div id="x_x_x_x_x_x_x_x_x_divRplyFwdMsg" dir="ltr"><font style="font-size:11pt" face="Calibri, sans-serif" color="#000000"><b>From:</b> dsg-hdice <dsg-hdice-bounces@jlab.org> on behalf of thomaso@jlab.org <thomaso@jlab.org><br>
<b>Sent:</b> Thursday, September 17, 2020 3:54 PM<br>
<b>To:</b> Tyler Lemon <tlemon@jlab.org><br>
<b>Cc:</b> dsg-hdice@jlab.org <dsg-hdice@jlab.org><br>
<b>Subject:</b> Re: [dsg-hdice] Found a built in averaging and referencing feature on sweep tab of Zurich lock-in amplifier</font>
<div> </div>
</div>
<div class="x_x_x_x_x_x_x_x_x_BodyFragment"><font size="2"><span style="font-size:11pt">
<div class="x_x_x_x_x_x_x_x_x_PlainText">Hi Tyler,<br>
<br>
Thanks for sharing this with us! I will check it out shortly.<br>
<br>
-Tom<br>
<br>
> Hi Xiangdong and Tom,<br>
><br>
> After our meeting, I ran a test sweep with the Zurich lock-in amplifier.<br>
> While it was running I was looking around the sweep tab's options and<br>
> found a sweep mode that lets you set a number of samples to take at each<br>
> frequency during a sweep. I also saw on the "History" tab in the sweep tab<br>
> there is a "Reference" option. These two options seem to result in what we<br>
> are trying to do with the fsNMR program.<br>
><br>
> So you all can look at it, attached are three screenshots with what to<br>
> click along with the steps below.<br>
><br>
> screenshot1.jpg<br>
> 1. Go to settings tab on right of sweep tab<br>
> 2. use drop down menu to change application to "Parameter Sweep Averaged"<br>
><br>
> screenshot2.jpg<br>
> 3. Click "Advanced" button on settings tab<br>
> 4. Enter averaging settings<br>
><br>
> At this point you'd run a sweep as normal. For the reference feature:<br>
><br>
> screenshot3.jpg<br>
> 5. Go to history tab on sweep tab<br>
> 6. select result to use as reference<br>
> 7. click "Reference" button<br>
> 8. Click button to toggle reference "on"<br>
><br>
> The next sweep you'd run will be referenced to whatever you selected in<br>
> step 6. An example result after averaging is in the amplitude plot for<br>
> screenshot1.jpg and in the attached CSV file.<br>
><br>
> I look forward to hearing what you think about and find with these<br>
> options.<br>
><br>
> -Tyler<br>
><br>
><br>
><br>
> _______________________________________________<br>
> dsg-hdice mailing list<br>
> dsg-hdice@jlab.org<br>
> <a href="https://mailman.jlab.org/mailman/listinfo/dsg-hdice">https://mailman.jlab.org/mailman/listinfo/dsg-hdice</a><br>
><br>
<br>
<br>
_______________________________________________<br>
dsg-hdice mailing list<br>
dsg-hdice@jlab.org<br>
<a href="https://mailman.jlab.org/mailman/listinfo/dsg-hdice">https://mailman.jlab.org/mailman/listinfo/dsg-hdice</a><br>
</div>
</span></font></div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</body>
</html>