<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<style type="text/css" style="display:none;"> P {margin-top:0;margin-bottom:0;} </style>
</head>
<body dir="ltr">
<div style="font-family: Calibri, Arial, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
Unless it is something already built in I don't think it's allowed, i.e. installing TeamViewer software.</div>
<div style="font-family: Calibri, Arial, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
<br>
</div>
<div style="font-family: Calibri, Arial, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
I haven't seen anything that says you couldn't do a screen share and give someone else control (since Teams seems to at least have the possibility of doing that), but you might want to check with the CC to be sure.</div>
<div>
<div id="appendonsend"></div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<hr tabindex="-1" style="display:inline-block; width:98%">
<div id="divRplyFwdMsg" dir="ltr"><font face="Calibri, sans-serif" color="#000000" style="font-size:11pt"><b>From:</b> dsg-hdice <dsg-hdice-bounces@jlab.org> on behalf of Tyler Lemon <tlemon@jlab.org><br>
<b>Sent:</b> Friday, October 9, 2020 3:47 PM<br>
<b>To:</b> thomaso@jlab.org <thomaso@jlab.org><br>
<b>Cc:</b> dsg-hdice@jlab.org <dsg-hdice@jlab.org><br>
<b>Subject:</b> Re: [dsg-hdice] Boxcar Averager Trial Dates</font>
<div> </div>
</div>
<div dir="ltr">
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
Hi Tom, <br>
</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
I'd be available anytime except for 11:00 - 12:00 for the Teams meeting with Ed.<br>
</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
Peter and Brian,</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
Just to maybe head off a problem, is using Teams to have an non-JLab user access a JLab PC allowable?</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
Tom, if the remote control aspect is not okay, would it be sufficient for Ed to remotely view my screen while I type and control the PC connected to the lock-in amplifier?<br>
</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
<br>
</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif; font-size:12pt; color:rgb(0,0,0)">
Tyler<br>
</div>
<div id="x_appendonsend"></div>
<hr tabindex="-1" style="display:inline-block; width:98%">
<div id="x_divRplyFwdMsg" dir="ltr"><font face="Calibri, sans-serif" color="#000000" style="font-size:11pt"><b>From:</b> thomaso@jlab.org <thomaso@jlab.org><br>
<b>Sent:</b> Friday, October 9, 2020 3:36 PM<br>
<b>To:</b> Tyler Lemon <tlemon@jlab.org><br>
<b>Cc:</b> thomaso@jlab.org <thomaso@jlab.org>; dsg-hdice@jlab.org <dsg-hdice@jlab.org><br>
<b>Subject:</b> Re: [dsg-hdice] Boxcar Averager Trial Dates</font>
<div> </div>
</div>
<div class="x_BodyFragment"><font size="2"><span style="font-size:11pt">
<div class="x_PlainText">Hi Tyler,<br>
<br>
I will ask Ed if we can start Monday. He mentioned in his last email <br>
that to start the trial "This will require a computer connected to the<br>
instrument that I can gain remote control over through teamviewer to<br>
activate the option."<br>
<br>
I won't have access to a PC connected to the Lock-In amplifier until<br>
Tuesday. Tyler, would you have access to a PC Monday? If so, would you<br>
have time on Monday to have a virtual meeting with Ed so he can activate<br>
the trial?<br>
<br>
Thanks,<br>
Tom<br>
<br>
> Hi Tom,<br>
><br>
> It seems like the best option would be to see if the trial period could<br>
> start on Monday. That way there'd be enough time for you all in HDice to<br>
> look into it, too.<br>
><br>
> I do not think it would be possible to write a program for the boxcar<br>
> averager during the one week trial period. Using the boxcar averager<br>
> during the trial period would have to be done through "manual" set up like<br>
> what was shown in the demo.<br>
><br>
> To not waste any part of the trial period, it might be a good idea to also<br>
> talk to Ed and verify the best way to set up the signals for the boxcar<br>
> averager. If I remember correctly from the demo, the signal detected from<br>
> the lock-in amplifier would need to be output through one of the Zurich<br>
> lock-in amplifier's auxiliary outputs and then into the boxcar averager<br>
> input.<br>
><br>
> Tyler<br>
> ________________________________<br>
> From: thomaso@jlab.org <thomaso@jlab.org><br>
> Sent: Friday, October 9, 2020 2:28 PM<br>
> To: Tyler Lemon <tlemon@jlab.org><br>
> Subject: Re: [dsg-hdice] Boxcar Averager Trial Dates<br>
><br>
> Hi Tyler,<br>
><br>
> I was speaking to Xiangdong today about our schedules. We will be<br>
> starting Run 2 of the experiment by the 26th. He believes him and I will<br>
> be too busy with running the experiment at UITF to be able to work on the<br>
> Boxcar Averager at this point.<br>
><br>
> He came up with two suggestions. First would be to activate the trial<br>
> possibly today (or more realistically Monday) if you have time to start<br>
> checking out the Boxcar features before your vacation.<br>
><br>
> The second option would be to start the trial on 10/26 when you are back.<br>
> Xiangdong pointed out that if we wait until then, it wouldn't give us much<br>
> time before we'd need the device for taking actual measurements. Also,<br>
> Xiangdong said we would have to let the DSG take over working with the<br>
> Boxcar Averager since all our time will be devoted to Run 2 of the<br>
> experiment. He wasn't sure how long you would need to investigate the<br>
> device/LabOne, write a program, and test before needing to take actual<br>
> measurements.<br>
><br>
><br>
> Let me know what you think about the situation when you have a chance.<br>
><br>
><br>
> Thanks,<br>
> Tom<br>
><br>
><br>
>> Hi Tom,<br>
>><br>
>> I will be on vacation from 10/17 through 10/25, so would it be possible<br>
>> to<br>
>> have trial period starting 10/26?<br>
>><br>
>> Tyler<br>
>> ________________________________<br>
>> From: dsg-hdice <dsg-hdice-bounces@jlab.org> on behalf of<br>
>> thomaso@jlab.org<br>
>> <thomaso@jlab.org><br>
>> Sent: Friday, October 9, 2020 12:15 AM<br>
>> To: dsg-hdice@jlab.org <dsg-hdice@jlab.org><br>
>> Subject: [dsg-hdice] Boxcar Averager Trial Dates<br>
>><br>
>> Hi Tyler,<br>
>><br>
>> I'm working with Ed, from Zurich, to schedule the 1 week trial for the<br>
>> Boxcar Averager. I was thinking of asking the trial to be from<br>
>> Wednesday<br>
>> October 14th to Wednesday October 21st given the HDice schedule.<br>
>><br>
>> However I wanted to check with you and your group first to see if that<br>
>> time frame works with your schedules should you want to try out the new<br>
>> features?<br>
>><br>
>> Thanks,<br>
>> Tom<br>
>><br>
>> _______________________________________________<br>
>> dsg-hdice mailing list<br>
>> dsg-hdice@jlab.org<br>
>> <a href="https://mailman.jlab.org/mailman/listinfo/dsg-hdice">https://mailman.jlab.org/mailman/listinfo/dsg-hdice</a><br>
>><br>
><br>
><br>
><br>
<br>
<br>
</div>
</span></font></div>
</div>
</div>
</body>
</html>