[Eesdc] Replacing a Box Supply

[Eric Diggs]

Eric Diggs wrote:
> Hello EESDC,
>
>  If you have to replace a box supply in the machine for any reason, do 
> not remove the quick connect from the holes.
> The quick connects on the box supplies should be all females, so that 
> the meter can plug right into it.
>
> There are meters in the spare cage with the holes already on them that 
> can be use in the North and South Access building.
> These meters where made to be mount on the side of the box supplies with 
> the holes going up to the manifold.
>
>
> Remember to check the spare cage, before removing the quick connect.
>
>
> Eric
>
> _______________________________________________
> Eesdc mailing list
> Eesdc at jlab.org
> https://mailman.jlab.org/mailman/listinfo/eesdc
>   
That should be hose and not holes.


Sorry for the mistake

Eric