[Eg6_analysis] [Lowq] Meeting tomorrow

Thu Dec 16 09:42:32 EST 2010

Hi Stepan,

For the software, I will leave the two outputs [1] & [3] combined for this
cooking too.
However, I will add the helicity modification when Raffaella is done with
it.

As for 1.2 GeV runs, we have two run periods. First from 61216 till 61482
with
109 production runs. Second set is from 61931 till 61966 with 25 production
runs.
So, a total of 134 runs will be processed. Those run numbers is based on the
list
of good runs study that I did after the pass0_v1 cooking. Some of these runs
are
very long. They contain more than hundred files which means A* and B*
extension
on the raw data. Until now I am processing just the A extension, shall I add
the B files
also to this cooking? I can expect that this cooking will be done in maximum
one week
depends on how much Auger will be busy in this period?

As for the output files, usually I am producing just the SEB NT10 ntuple and
the BOS
files when I am cooking to Raphael. But in case some other people might be
interested
to analyse these data, I may produce the full list of output files:
  - ROOT files: CLASTOOL & H2ROOT root ntuples.
  - SEB Nt10 ntuple.
  - BOS files
  - ANAHIST hbook file
  - Helicity correction file
  - LOG files
I will manage to save the SEB ntuple in the claseg6 work disk and copy all
others files to
the auto-managed work disk but they will be linked to the claseg6 work disk.
I will leave the
IC banks active on those outputs but if there is no objection I may turn off
the hodoscope
banks.

Best regards,

Lamiaa

************************************************************
*  Lamiaa El Fassi             email: elfassi at jlab.org
*  Research Associate @ Rutgers University
*  Phone: (757) 269-7011 // Fax: (757) 269-5703
*  Jefferson Lab., 12000 Jefferson Ave.
*  Suite# 4, MS 12H3
*  Newport News, VA. 23606
************************************************************

On Wed, Dec 15, 2010 at 11:28 PM, Stepan Stepanyan <stepanya at jlab.org>wrote:

>  Hi Lamiaa,
>
> You can leave changes for DC as they are, no problem.
> For 1.2 GeV one output [1] will be enough. But if you
> do not want to touch the code you can leave as it is
> [1] and [3]. Since this is again mostly for Raphael for
> the RTPC calibration, we do not want to select events
> with restriction on a track in RTPC.
>
> How long the cooking of 1.2 GeV takes, all the files of
> all good runs.
>
> Thanks, Stepan
>
> On 12/15/10 2:46 AM, Lamiaa El Fassi wrote:
>
> Hi Stepan,
>
> Up to now, user_ana codes are up-to-date since we didn't do any changes
> since
> the previous cooking except the DC initial fit parameters that I changed to
> make
> them similar to dc3. Shall I leave them like that?
> In the previous cooking we decided to combine
> - [1] a negatively charged TB track
> - [3] a positively charged track with at least 2 neutrals (in any EC - IC
> combinations)
> in the produced bos file. We turned off the other two outputs:
> - [2] a good electron and a positively charged particle (I made a change)
> - [4] at least 1 track in RTPC and at least 2 neutrals in  (any EC - IC
> combinations)
>
> I think last cooking choice is okay for the RTPC calibration since I
> already used it on
> some cooking for Raphael, unless you may want to add the RTPC track to this
>
> cooking outputs. Please let me know which output configuration shall we use
> in this
> cooking.
>
> I will wait for the new helicity modification by Raffaella to implement it
> into our
> cooking packages. She already contacted me to get the tcl file to run some
> test
> after the helicity modification that she did to her cooking codes version.
>
> Best regards,
>
> Lamiaa
>
>
> ************************************************************
> *  Lamiaa El Fassi             email: elfassi at jlab.org
> *  Research Associate @ Rutgers University
> *  Phone: (757) 269-7011 // Fax: (757) 269-5703
> *  Jefferson Lab., 12000 Jefferson Ave.
> *  Suite# 4, MS 12H3
> *  Newport News, VA. 23606
> ************************************************************
>
>
> On Tue, Dec 14, 2010 at 9:32 AM, Stepan Stepanyan <stepanya at jlab.org>
> wrote:
>
>>  Hi Lamiaa,
>>
>> On the meeting today we decided to not wait for IC calibration
>> and cook 1.2 GeV for Raphael for RTPC work. What we need to
>> do is to make sure code is up to date. Raffaella mentioned that
>> she can add helicity calculations into it within this week. For
>> 1.2 GeV we do not need any output but electron events.
>> Let's work towards having everything ready for 1.2 GeV cooking,
>> all of the good runs, by the end of the week. Let me know what
>> we are missing and what we need to accomplish this goal.
>>
>> Thanks, Stepan
>>
>>
>> On 12/13/10 9:49 PM, Lamiaa El Fassi wrote:
>>
>> Hi Stepan,
>>
>> Sure we can talk about that whenever you want. Please let me know when
>> it's convenient for you and I will call you.
>>
>> Best regards,
>>
>> Lamiaa
>>
>> ************************************************************
>> *  Lamiaa El Fassi             email: elfassi at jlab.org
>> *  Research Associate @ Rutgers University
>> *  Phone: (757) 269-7011 // Fax: (757) 269-5703
>> *  Jefferson Lab., 12000 Jefferson Ave.
>> *  Suite# 4, MS 12H3
>> *  Newport News, VA. 23606
>> ************************************************************
>>
>>
>> On Mon, Dec 13, 2010 at 6:23 PM, Stepan Stepanyan <stepanya at jlab.org>
>> wrote:
>>
>>>  Hi Lamiaa,
>>>
>>> Thanks for the email. Sorry we did not cross today. I am
>>> on "vacation" but I come for few meetings.
>>>
>>> One thing I wanted to talk to you is the preparation of the
>>> software for the next cooking, including outputs. I guess
>>> we can do it offline.
>>>
>>> Have a safe flight.
>>>
>>> Stepan
>>>
>>> On 12/13/10 6:10 PM, Lamiaa El Fassi wrote:
>>>
>>> Hi Stepan,
>>>
>>> I was willing to stop by to talk to you today but I didn't have a chance
>>> to do so and it seems you are on vacation. I am leaving tomorrow morning and
>>> I am not able to attend the meeting since my flight is on the same meeting
>>> time.
>>>
>>> Best regards,
>>>
>>> Lamiaa
>>>
>>> *Sent from my MOTOBLUR™ smartphone on AT&T*
>>>
>>>
>>> -----Original message-----
>>>
>>> *From: *Stepan Stepanyan <stepanya at jlab.org> <stepanya at jlab.org>*
>>> To: *eg6_analysis at jlab.org, lowq at jlab.org*
>>> Sent: *Mon, Dec 13, 2010 16:50:34 GMT+00:00*
>>> Subject: *[Lowq] Meeting tomorrow
>>>
>>>  Dear all,
>>>
>>> We will have eg6 meeting tomorrow Tuesday, December 14, at 9:30am
>>> in room B101.
>>> Agenda items can be found at -
>>>
>>> http://clasweb.jlab.org/rungroups/lowq/wiki/index.php/Meeting_on_December_14_at_9:30am
>>>
>>> Calling instructions can be found at :
>>>
>>> http://clasweb.jlab.org/rungroups/lowq/wiki/index.php/Agendas_and_Minutes_of_the_meetings
>>> .
>>>
>>>
>>> Regards, Stepan
>>>
>>> _______________________________________________
>>> Lowq mailing list
>>> Lowq at jlab.org
>>> https://mailman.jlab.org/mailman/listinfo/lowq
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://mailman.jlab.org/pipermail/eg6_analysis/attachments/20101216/4aa1949e/attachment.html 