[Eg6_analysis] CCT Bank

[Lamiaa El Fassi]

Hi Rafayel,

Sure, I can do that. But first I need to know how much statistics do you
need?

For your list of runs / files:

61521  / 64
61642  / 82
61728  / 87
61764  / 98
61878  / 108

In case I will process the full runs, I will end up with 439 main BOS files
(with .A00 suffix) and sometimes the file *.A01 is also produced especially
when adding some raw banks like what is
required for this calibration. Saving those files on the claseg6 work disk
means that I need to
empty roughly 878 GB.

Currently, the claseg6 disk partition is as follow:

1.5 TB pass1_v0 SEB ntuples of 1.2 GeV data
553 GB HRoot files of IC calibration
30  GB  SEB ntuples of a run 61695 processed previously for the CC
calibration

As a reference, this is a list of bosbanks that I am using for this
calibration:

setc outbanknames(1) "HEADCC  CCT
SCRCHELCRUNCTBIDCL01TRPBTBTRCC01CCPBSHHBSHPBDCPBECPBEVNTFBPMHEVTICHBICPBPARTSCPBTBERECHBGCPBBMPRVERTMVRTTGBIHLS
";

Please Stepan and all, shall I go ahead and delete the old files saved in
our work disk?

Best regards,

Lamiaa

On Fri, Oct 14, 2011 at 10:03 AM, Rafayel Paremuzyan <rafopar at jlab.org>wrote:

> **
> Hi Lamiaa,
>
> sorry, I copied BOS files lately, and 12 files were deleted from the run
> 61695,
> but anyway when I run my script over remaining files, it turned out
> that statistic will be small in one run.
> Could you please cook five more runs let say
> 61521
> 61642
> 61728
> 61764
> 61878
>
> Since it turned out that I should work with BOS files, could you please
> save BOS files in the claseg6 disk instead of hbook files?
>
> Rafayel
>
>
>
> On 09/08/2011 09:24 AM, Lamiaa El Fassi wrote:
>
> Hi Rafayel,
>
> Please find the outputs of the processed run 61695 at the following
> directory:
> /w/hallb/claseg6/top_dir/ccpass1_v0/6gev/.
> In this cooking, I have turned on the CC and CC ntuple flags on the tcl
> file.
> As a consequence, you have two extra banks, CC & CCHIT, on the SEB ntuple
> with the required TDC info.
>
> Best,
>
> Lamiaa
>
> On Wed, Sep 7, 2011 at 12:33 PM, Rafayel Paremuzyan <rafopar at jlab.org>
> wrote:
>
>> Thanks Lamia,
>>
>> I use h10 ntuple.
>>
>> Rafayel
>>
>>
>>
>>  > Hi Rafayel,
>> >
>> > I will process a 6 GeV run, 61695, for you. Would you please tell me
>> which
>> > kind of outputs
>> > you will be using, SEB ntuples, BOS or ROOT files.., to save them on
>> > claseg6
>> > work disk?
>> > None of these files will be saved on SILO.
>> >
>> > Best,
>> >
>> > Lamiaa
>> >
>> >
>> > On Wed, Sep 7, 2011 at 8:35 AM, Rafayel Paremuzyan <rafopar at jlab.org>
>> > wrote:
>> >
>> >> Dear Lamia,
>> >>
>> >> I am going to work on the CC TDC calibration.
>> >> I will need CC TDC information.
>> >> Could you please cook one run from 6 GeV, which in addition to standard
>> >> banks will contain cc and cct banks in it?
>> >>
>> >> Rafayel
>> >>
>> >
>>
>>
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://mailman.jlab.org/pipermail/eg6_analysis/attachments/20111014/05985e9b/attachment.html