[Eg6_analysis] Pass1_v1 Readiness

Mon Mar 18 04:56:35 EDT 2013

Hi All,

I have updated the EG6 monitoring web-page with the link of the ongoing
Pass1_v1 cooking of the 1.2 GeV dataset (this
link<http://www.jlab.org/Hall-B/secure/eg6/cooking/online_sql/monitor.html>).
As you will notice I
made some changes to the structure of our monitoring page. Currently in
the top right frame you can pick from the cooking monitor table either the
cooking passes or some of the processed calibration check rounds (I removed
bunch of old calibration links). Once you click on any pass in the first
frame,
its name will be displayed in the second frame where you can check the
plots
of the monitoring variables.

Up to now, roughly 75% of the 1.2 GeV cooking is done. However, based on a
decision made this weekend, the real 1.2 GeV production runlist is the one
attached
(only 29 runs out of 117 that I sent earlier). Please don't pay too much
attention
to the fluctuation that you may see in these monitoring plots outside the
region from
61448 to 61481 because all the rest of runs, according to the RTPC experts,
were
unstable (fluctuation of the RTPC HV..etc). In case you prefer to show only
the
production region in these plots, I can change them. Please tell me your
preferences?

Once this cooking is done, I will process the Hydrogen data (not
"production" runs)
followed first by the 5.7 GeV dataset. By the way, since I am saving the
HRoot ntuples
on this volatile directory: /volatile/clas/claseg6/pass1_v1/1p2gev/HROOT/,
and in case
anyone will start looking to these data please let me know if you will find
any corrupted/bad
files to reprocess them.

Thank you,

Lamiaa

************************************************************
*  Lamiaa El Fassi            email: lamiaa11 at fnal.gov
*  Research Associate @ Rutgers University
*  Phone: (630) 840-4861
*  Fermilab, Aspen East #105
*  Batavia, IL. 60510
************************************************************

On Thu, Mar 14, 2013 at 5:11 PM, Stepan Stepanyan <stepanya at jlab.org> wrote:

>  Hello Lamiaa,
>
> Seems to me everything is well planned. I think any run we have
> with production settings of RTPC (HV and  gas) that do not have
> any obvious problem we should cook.
> Personally I do not have preference for CLASTOOL ntuples, if it
> is not too much trouble for you I would prefer to generate them.
>
> Thanks, Stepan
>
> On 3/14/13 5:31 PM, Lamiaa El Fassi wrote:
>
> Hi All,
>
> As a readiness of our next Pass1_v1 cooking, I would like to check with
> you some information before start processing the data.
> Like Pass1_v0, I will first process the 1.2 GeV data. Its run-list is
> attached. I have split this list into two to separate the special
> 1H runs from others. I am thinking to process the Hydrogen data afterwards
> to store it in Silo under the 1.2 GeV directory, like
> /mss/clas/eg6/production/pass1_v1/1p2gev/1H. In such case, it will be easy
> to jcache it if it's needed for any study. Do you think
> it's worthy to do that?
> All other data sets will be stored in Silo under directories tagged with
> the associated beam energy. I am attaching also the list
> of different dataset runs, which I previously used.
>
> In addition, please have a look to the attached tcl file and let me know
> if any modification is needed. As usual, all calibration banks
> are turned off, even the RTPC ones (TPC and TPCC). If you have any new
> preferences, I will be happy to change it!
>
> In this cooking, I am willing to produce the regular output files listed
> below:
>       1. SEB ntuples,
>       2. HROOT ntuples,
>       3. CLASTOOL ntuples,         ! Not sure if it is still required!
>       4. BOS files
>       5. ANAHIST files
>       6. Helicity correction text files,
>       7. LOG files
>
> Due to the size of our 1.2 GeV data set, I can save its HROOT (Anahist/LOG
> for debugging) files in our permanent volatile disk.
> Hence, it will be easy to access and analyze the new processed data
> afterwards. However, this feature may not be possible for
> the other data sets (at least for the 6 GeV data!)
>
> Last but not least, the new processed data will be monitored in our CSQL
> web-page under a new table/bullet "Pass1_v1". The latter
> will be quite similar to the latest 1.2 GeV test table epass1_v11<http://www.jlab.org/Hall-B/secure/eg6/cooking/online_sql/monitor.html>
> .
>
> Please feel free to send me any comments or suggestions concerning the
> proposed cooking plan and tools.
>
> Best regards,
>
> Lamiaa
>
> ************************************************************
> *  Lamiaa El Fassi            email: lamiaa11 at fnal.gov
> *  Research Associate @ Rutgers University
> *  Phone: (630) 840-4861
> *  Fermilab, Aspen East #105
> *  Batavia, IL. 60510
> ************************************************************
>
>
>
>
>
> _______________________________________________
> Eg6_analysis mailing listEg6_analysis at jlab.orghttps://mailman.jlab.org/mailman/listinfo/eg6_analysis
>
>
> _______________________________________________
> Eg6_analysis mailing list
> Eg6_analysis at jlab.org
> https://mailman.jlab.org/mailman/listinfo/eg6_analysis
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://mailman.jlab.org/pipermail/eg6_analysis/attachments/20130318/d0a35786/attachment.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: eg6_1p2runs_prod.dat
Type: application/octet-stream
Size: 175 bytes
Desc: not available
Url : https://mailman.jlab.org/pipermail/eg6_analysis/attachments/20130318/d0a35786/attachment.obj 