[Eg6_analysis] Calibration cooking

[Mohammad Hattawy]

Dear Lamiaa and All,
   We worked on drift paths calibration from 1.269 GeV runs at the end of
the experiment. We found that the extracted drift paths from 1.206 GeV runs
is changing during the run because of the change in drift speed.

  I extracted new drift paths from the last 1.269 GeV runs and changed some
parameters. These changes done inside the attached file, Which is
originally can be found in the gem package.

  Lamiaa, could you replace the original gem/init_paths_using_fit.c by the
attached file and cook the runs:
1) 1.269 GeV data which are the runs between 61932 - 61961
2)  6 GeV runs between 61904 - 61630

  For these runs, i also need the detailed TPCC bank which contains the raw
ADCs and TDCs. For the type of the output, I will only need the HROOT files.

-- 
Best regards,
Mohammad Hattawy.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://mailman.jlab.org/pipermail/eg6_analysis/attachments/20131126/9bf45117/attachment.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: init_paths_using_fit.c
Type: text/x-csrc
Size: 8018 bytes
Desc: not available
Url : https://mailman.jlab.org/pipermail/eg6_analysis/attachments/20131126/9bf45117/attachment.bin