[Eg6_analysis] Calibration cooking

[Mohammad Hattawy]

Hello Lamiaa,
  Yes sure, this is fine for next week. For the 6 GeV runs, Sorry i meant
the runs 61904 to 61930. If you can process just the first 10 files of
each, i will be perfect. For 1.27 GeV runs, i need full runs if you can.

Best regards,
Mohammad Hattawy.



On Tue, Nov 26, 2013 at 11:32 PM, Lamiaa El Fassi <lamiomar at gmail.com>wrote:

> Hi Mohammad,
>
> I will be happy to apply this change and process the requested runs for
> you, but I am not able to do it this week. It will be my first work to do
> once I am back to US next week.  Hopefully that is fine with you.
>
> By the way, did you mean 6 GeV runs between 61604 - 61630 or 61630 - 61904?
> Do you want me to process the full run or just few files (10 or so!) from
> each run?
>
> Best regards,
>
> Lamiaa
>
>
>
> On Tue, Nov 26, 2013 at 3:37 PM, Mohammad Hattawy <
> mohammad.hattawy at gmail.com> wrote:
>
>> Dear Lamiaa and All,
>>    We worked on drift paths calibration from 1.269 GeV runs at the end of
>> the experiment. We found that the extracted drift paths from 1.206 GeV runs
>> is changing during the run because of the change in drift speed.
>>
>>   I extracted new drift paths from the last 1.269 GeV runs and changed
>> some parameters. These changes done inside the attached file, Which is
>> originally can be found in the gem package.
>>
>>   Lamiaa, could you replace the original gem/init_paths_using_fit.c by
>> the attached file and cook the runs:
>> 1) 1.269 GeV data which are the runs between 61932 - 61961
>> 2)  6 GeV runs between 61904 - 61630
>>
>>   For these runs, i also need the detailed TPCC bank which contains the
>> raw ADCs and TDCs. For the type of the output, I will only need the HROOT
>> files.
>>
>> --
>> Best regards,
>> Mohammad Hattawy.
>>
>
>


-- 
Best regards,
Mohammad Hattawy.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://mailman.jlab.org/pipermail/eg6_analysis/attachments/20131127/cf185a6f/attachment.html