[Eg6_analysis] gpp

[hattawy]

Hello Nathan and all,
    Thanks a lot. This has solved the problem and all the super-layers 
are now responding to the changes in the smearing factors.

-Regards,
Mohammad.


On 2014-11-27 13:11, Nathan Baltzell wrote:
> I linked e1dvcs's constants from run #1 for the entire GPP system
> to eg6's run index for runs 1-10.   I chose e1dvcs since they seemed
> to have some more modern constants and also have something for
> the IC.  The DC_WIRE subsystem needs to be updated for eg6.
> 
> Mohammad, this should solve your most recent issue with gpp ...
> 
> -Nathan
> 
> 
> 
> 
> info: in calib_user.RunIndexeg6, runs 1-10 for GPP, DC, Reg1 now are
> linked with constant set ID 125, runIndexId is 435987
> warning: no constants found linked to run 1 for system GPP, subsystem
> DC, item Reg1_mean in calib_user.RunIndexe1dvcs
> info: in calib_user.RunIndexeg6, runs 1-10 for GPP, DC, Reg2 now are
> linked with constant set ID 121, runIndexId is 435988
> warning: no constants found linked to run 1 for system GPP, subsystem
> DC, item Reg2_mean in calib_user.RunIndexe1dvcs
> info: in calib_user.RunIndexeg6, runs 1-10 for GPP, DC, Reg3 now are
> linked with constant set ID 121, runIndexId is 435989
> warning: no constants found linked to run 1 for system GPP, subsystem
> DC, item Reg3_mean in calib_user.RunIndexe1dvcs
> info: in calib_user.RunIndexeg6, runs 1-10 for GPP, DC_WIRE, sector1
> now are linked with constant set ID 8, runIndexId is 435990
> info: in calib_user.RunIndexeg6, runs 1-10 for GPP, DC_WIRE, sector2
> now are linked with constant set ID 5, runIndexId is 435991
> info: in calib_user.RunIndexeg6, runs 1-10 for GPP, DC_WIRE, sector3
> now are linked with constant set ID 5, runIndexId is 435992
> info: in calib_user.RunIndexeg6, runs 1-10 for GPP, DC_WIRE, sector4
> now are linked with constant set ID 5, runIndexId is 435993
> info: in calib_user.RunIndexeg6, runs 1-10 for GPP, DC_WIRE, sector5
> now are linked with constant set ID 5, runIndexId is 435994
> info: in calib_user.RunIndexeg6, runs 1-10 for GPP, DC_WIRE, sector6
> now are linked with constant set ID 5, runIndexId is 435995
> info: in calib_user.RunIndexeg6, runs 1-10 for GPP, IC, ic_a now are
> linked with constant set ID 4, runIndexId is 435996
> info: in calib_user.RunIndexeg6, runs 1-10 for GPP, IC, ic_b now are
> linked with constant set ID 6, runIndexId is 435997
> info: in calib_user.RunIndexeg6, runs 1-10 for GPP, IC, ic_c now are
> linked with constant set ID 1, runIndexId is 435998
> info: in calib_user.RunIndexeg6, runs 1-10 for GPP, IC, noise now are
> linked with constant set ID 2, runIndexId is 435999
> info: in calib_user.RunIndexeg6, runs 1-10 for GPP, IC, noiseRMS now
> are linked with constant set ID 2, runIndexId is 436000
> info: in calib_user.RunIndexeg6, runs 1-10 for GPP, IC, timeRMS now
> are linked with constant set ID 2, runIndexId is 436001
> info: in calib_user.RunIndexeg6, runs 1-10 for GPP, SC, Length now are
> linked with constant set ID 2, runIndexId is 436002
> info: in calib_user.RunIndexeg6, runs 1-10 for GPP, SC, Sigma now are
> linked with constant set ID 2, runIndexId is 436003
> warning: no constants found linked to run 1 for system GPP, subsystem
> SC, item Sigma57 in calib_user.RunIndexe1dvcs
> warning: no constants found linked to run 1 for system GPP, subsystem
> tagr, item offset in calib_user.RunIndexe1dvcs
> warning: no constants found linked to run 1 for system GPP, subsystem
> tagr, item sigma in calib_user.RunIndexe1dvcs
> 
> 
> 
> 
> On Nov 26, 2014, at 11:42 PM, Stepan Stepanyan <stepanya at jlab.org> 
> wrote:
> 
>> Hi Nathan,
>> 
>> Thanks for looking into this. I am not an expert, but I think
>> parameters p0/p1/p2 should not depend on run, so you can
>> get it from any run group, e.g. e1-6/g10 ...
>> 
>> Stepan
>> On 11/26/14, 8:06 PM, Nathan Baltzell wrote:
>>> The reason why Mohammad doesn't see any affect from changing the 
>>> region 1
>>> smearing factor in gpp turns out to be because the database has all 
>>> zeroes for
>>> GPP/DC/Reg1 (and non-zeroes for the other regions).  A number of 
>>> calib_user
>>> tables also have this issue, and also the main calib.RunIndex.
>>> 
>>> These missing constants are polynomial coefficients used to
>>> calculate a sigma with which to smear doca in the DOCA bank:
>>> 
>>> sigma = p0 + p1*doca + p2*doca ….
>>> 
>>> Anyone know how to calculate them?
>>> Or should we just copy them from another rungroup?
>>> 
>>> -Nathan
>>> _______________________________________________
>>> Eg6_analysis mailing list
>>> Eg6_analysis at jlab.org
>>> https://mailman.jlab.org/mailman/listinfo/eg6_analysis
>> 
>> _______________________________________________
>> Eg6_analysis mailing list
>> Eg6_analysis at jlab.org
>> https://mailman.jlab.org/mailman/listinfo/eg6_analysis
> 
> 
> _______________________________________________
> Eg6_analysis mailing list
> Eg6_analysis at jlab.org
> https://mailman.jlab.org/mailman/listinfo/eg6_analysis