Hi all,<br><br>As an update of the ongoing Pass1_v1 cooking status, the 5.7 data processing was <br>done Friday morning. I realized after our last weekly meeting that I forgot processing <br>eleven runs, which were taken in the second 5.7 GeV running period. The cooking of <br>
the 6 GeV dataset started Friday afternoon. Based on the batch farm processing rate <br>over this weekend, I believe the 6 GeV cooking can be done in two weeks (if the auger <br>traffic will not dramatically change)! In addition, I may need extra few days to process <br>
any crashed files which are missing in Silo. <br><br>For a quick analysis check, the 6 GeV HROOT files are saved in volatile disk under the <br>pass1_v1 directory, /volatile/clas/claseg6/pass1_v1/6gev/HROOT/. Please notify me if you <br>
notice any missing or bad files while checking this data or other datasets as well (except <br>the files that I mentioned in the last weekly meeting linked <a href="https://clasweb.jlab.org/rungroups/lowq/wiki/index.php/Cooking_Notes">here</a>).<br>
<br>Thank you,<br><br>Lamiaa<br><br clear="all"><div>************************************************************<br>* Lamiaa El Fassi email: <a href="mailto:lamiaa11@fnal.gov">lamiaa11@fnal.gov</a><br>
* Research Associate @ Rutgers University <br>* Phone: (630) 840-4861 <br>* Fermilab, Aspen East #105 <br>* Batavia, IL. 60510<br>************************************************************</div>
<br><br><div class="gmail_quote">On Thu, Mar 21, 2013 at 12:10 PM, Lamiaa El Fassi <<a href="mailto:lamiomar@gmail.com">lamiomar@gmail.com</a>> wrote:<br><blockquote class="gmail_quote">
Hi all,<br><br>As a reference, I put all information about the Pass1_v1 cooking in the cooking notes link: <a href="https://clasweb.jlab.org/rungroups/lowq/wiki/index.php/Cooking_Notes">https://clasweb.jlab.org/rungroups/lowq/wiki/index.php/Cooking_Notes</a>, that can be accessed <br>
from the main EG6 wiki page. For your convenience, I am linking also to these cooking notes <br>the weekly minutes that may have some information about the ongoing cooking status.<div class="im HOEnZb"><br><br>Best regards,<br>
<br>Lamiaa<br><br clear="all">
<div>************************************************************<br>* Lamiaa El Fassi email: <a href="mailto:lamiaa11@fnal.gov">lamiaa11@fnal.gov</a><br>* Research Associate @ Rutgers University <br>
* Phone: <a href="tel:%28630%29%20840-4861">(630) 840-4861</a> <br>* Fermilab, Aspen East #105 <br>* Batavia, IL. 60510<br>************************************************************</div>
<br><br></div><div class="HOEnZb"><div class="h5"><div class="gmail_quote">On Mon, Mar 18, 2013 at 3:40 PM, Stepan Stepanyan <<a href="mailto:stepanya@jlab.org">stepanya@jlab.org</a>> wrote:<br>
<blockquote class="gmail_quote">
<div bgcolor="#FFFFFF" text="#000000">
Hello Lamiaa,<br>
<br>
Thanks for the update and putting all these together. <br>
Monitoring page looks good, very useful. <br>
<br>
Regards, Stepan<div><div><br>
<br>
<div>On 3/18/13 4:56 AM, Lamiaa El Fassi
wrote:<br>
</div>
<blockquote type="cite">Hi All,<br>
<br>
I have updated the EG6 monitoring web-page with the link of the
ongoing <br>
Pass1_v1 cooking of the 1.2 GeV dataset (<a href="http://www.jlab.org/Hall-B/secure/eg6/cooking/online_sql/monitor.html">this
link</a>). As you will notice I <br>
made some changes to the structure of our monitoring page.
Currently in <br>
the top right frame you can pick from the cooking monitor table
either the <br>
cooking passes or some of the processed calibration check rounds
(I removed <br>
bunch of old calibration links). Once you click on any pass in the
first frame, <br>
its name will be displayed in the second frame where you can check
the plots <br>
of the monitoring variables.<br>
<br>
Up to now, roughly 75% of the 1.2 GeV cooking is done. However,
based on a <br>
decision made this weekend, the real 1.2 GeV production runlist is
the one attached <br>
(only 29 runs out of 117 that I sent earlier). Please don't pay
too much attention <br>
to the fluctuation that you may see in these monitoring plots
outside the region from <br>
61448 to 61481 because all the rest of runs, according to the RTPC
experts, were <br>
unstable (fluctuation of the RTPC HV..etc). In case you prefer to
show only the <br>
production region in these plots, I can change them. Please tell
me your preferences?<br>
<br>
Once this cooking is done, I will process the Hydrogen data (not
"production" runs) <br>
followed first by the 5.7 GeV dataset. By the way, since I am
saving the HRoot ntuples <br>
on this volatile directory:
/volatile/clas/claseg6/pass1_v1/1p2gev/HROOT/, and in case <br>
anyone will start looking to these data please let me know if you
will find any corrupted/bad <br>
files to reprocess them.<br>
<br>
Thank you,<br>
<br>
Lamiaa<br>
<br clear="all">
<div>************************************************************<br>
* Lamiaa El Fassi email: <a href="mailto:lamiaa11@fnal.gov">lamiaa11@fnal.gov</a><br>
* Research Associate @ Rutgers University <br>
* Phone: <a href="tel:%28630%29%20840-4861">(630) 840-4861</a> <br>
* Fermilab, Aspen East #105 <br>
* Batavia, IL. 60510<br>
************************************************************</div>
<br>
<br>
<div class="gmail_quote">On Thu, Mar 14, 2013 at 5:11 PM, Stepan
Stepanyan <<a href="mailto:stepanya@jlab.org">stepanya@jlab.org</a>>
wrote:<br>
<blockquote class="gmail_quote">
<div bgcolor="#FFFFFF" text="#000000"> Hello Lamiaa,<br>
<br>
Seems to me everything is well planned. I think any run we
have<br>
with production settings of RTPC (HV and gas) that do not
have <br>
any obvious problem we should cook.<br>
Personally I do not have preference for CLASTOOL ntuples, if
it <br>
is not too much trouble for you I would prefer to generate
them.<br>
<br>
Thanks, Stepan <br>
<div>
<div> <br>
On 3/14/13 5:31 PM, Lamiaa El Fassi wrote: </div>
</div>
<blockquote type="cite">
<div>
<div>Hi All,<br>
<div class="gmail_quote"> <br>
As a readiness of our next Pass1_v1 cooking, I would
like to check with you some information before start
processing the data. <br>
Like Pass1_v0, I will first process the 1.2 GeV
data. Its run-list is attached. I have split this
list into two to separate the special <br>
1H runs from others. I am thinking to process the
Hydrogen data afterwards to store it in Silo under
the 1.2 GeV directory, like <br>
/mss/clas/eg6/production/pass1_v1/1p2gev/1H. In such
case, it will be easy to jcache it if it's needed
for any study. Do you think <br>
it's worthy to do that?<br>
All other data sets will be stored in Silo under
directories tagged with the associated beam energy.
I am attaching also the list <br>
of different dataset runs, which I previously used.<br>
<br>
In addition, please have a look to the attached tcl
file and let me know if any modification is needed.
As usual, all calibration banks <br>
are turned off, even the RTPC ones (TPC and TPCC).
If you have any new preferences, I will be happy to
change it! <br>
<br>
In this cooking, I am willing to produce the regular
output files listed below:<br>
1. SEB ntuples,<br>
2. HROOT ntuples,<br>
3. CLASTOOL ntuples, ! Not sure if it
is still required!<br>
4. BOS files<br>
5. ANAHIST files<br>
6. Helicity correction text files,<br>
7. LOG files<br>
<br>
Due to the size of our 1.2 GeV data set, I can save
its HROOT (Anahist/LOG for debugging) files in our
permanent volatile disk. <br>
Hence, it will be easy to access and analyze the new
processed data afterwards. However, this feature may
not be possible for <br>
the other data sets (at least for the 6 GeV data!)<br>
<br>
Last but not least, the new processed data will be
monitored in our CSQL web-page under a new
table/bullet "Pass1_v1". The latter <br>
will be quite similar to the latest 1.2 GeV test
table <a href="http://www.jlab.org/Hall-B/secure/eg6/cooking/online_sql/monitor.html">epass1_v11</a>.<br>
<br>
Please feel free to send me any comments or
suggestions concerning the proposed cooking plan and
tools.<br>
<br>
Best regards,<br>
<br>
Lamiaa<br>
<br clear="all">
<div>************************************************************<br>
* Lamiaa El Fassi email: <a href="mailto:lamiaa11@fnal.gov">lamiaa11@fnal.gov</a><br>
* Research Associate @ Rutgers University
<br>
* Phone: <a href="tel:%28630%29%20840-4861">(630) 840-4861</a>
<br>
* Fermilab, Aspen East #105 <br>
* Batavia, IL. 60510<br>
************************************************************</div>
<br>
<br>
</div>
<br>
<br>
<fieldset></fieldset>
<br>
</div>
</div>
<pre>_______________________________________________
Eg6_analysis mailing list
<a href="mailto:Eg6_analysis@jlab.org">Eg6_analysis@jlab.org</a>
<a href="https://mailman.jlab.org/mailman/listinfo/eg6_analysis">https://mailman.jlab.org/mailman/listinfo/eg6_analysis</a></pre>
</blockquote>
</div>
<br>
_______________________________________________<br>
Eg6_analysis mailing list<br>
<a href="mailto:Eg6_analysis@jlab.org">Eg6_analysis@jlab.org</a><br>
<a href="https://mailman.jlab.org/mailman/listinfo/eg6_analysis">https://mailman.jlab.org/mailman/listinfo/eg6_analysis</a><br>
<br>
</blockquote>
</div>
<br>
</blockquote>
<br>
</div></div></div>
</blockquote></div><br>
</div></div></blockquote></div><br>