[Frost] ROOTBEER and COBRA

[Michael Dugger]

Sung,

Thanks for the information. I will probably have some questions later on, 
but for now I will try to reproduce the vertex distribution and determine 
which cut is "fixing" the Butanol slope that I see.

Take care,
Michael

On Mon, 25 Oct 2010, Sungkyun Park wrote:

> Hi Michael,
>
> I have summarized the cuts I used to make the my vertex distribution plot
>
>   http://hadron.physics.fsu.edu/~skpark/research/research_oct2210.html
>
> I will describe how I use the kinematic fitter in my code.
> In the initial stage, I have built my analysis code in the ROOTBEER framework.
> I made new Makefile for my code so I do not use the ROOTBEER when I make some executable files for my code.
>
> However, I used the eloss library made in ROOTBEER (  $ROOTBEER/slib/LinuxRHFC8/libeloss.so )
> and I used the cobra library in CLAS packages ( $(COBRASYS)/lib/libKinFit.so ) in my analysis code.
>
> On both libraries, I have built the kinematic fitter.
>
> Best Wishes
>
> Sung
> Florida State University
>
> ----- Original Message -----LinuxRHFC8
> From: Michael Dugger <dugger at jlab.org>
> Date: Thursday, October 21, 2010 11:33 am
> Subject: Re: ROOTBEER and COBRA
> To: Sungkyun Park <sp06k at fsu.edu>
> Cc: frost at jlab.org
>
>>
>> Sung,
>>
>> I don't understand what is meant by "single frame for FroST". I am
>> also
>> confused as to the use of "the libraries of the eloss linked to
>> ROOTBEER
>> and the cobra in CLAS packages".
>>
>> Can you clarify?
>>
>> -Michael
>>
>> On Thu, 21 Oct 2010, Sungkyun Park wrote:
>>
>>> Michael.
>>>
>>> That is not true.
>>>
>>> My code is not in the ROOTBEER framework.
>>> I have my single frame for FroST.
>>> I only use the libraries of the eloss linked to ROOTBEER and the
>> cobra in CLAS packages.
>>>
>>> Sung
>>>
>>>
>>>
>>> ----- Original Message -----
>>> From: Michael Dugger <dugger at jlab.org>
>>> Date: Wednesday, October 20, 2010 4:36 pm
>>> Subject: ROOTBEER and COBRA
>>> To: Sungkyun Park <sp06k at fsu.edu>
>>> Cc: frost at jlab.org
>>>
>>>>
>>>> Sung,
>>>>
>>>> I'm under the impression that you are using the kinematic fitter
>>>> within the
>>>> ROOTBEER framework. Is this correct?
>>>>
>>>> If this is true, can you let us know how to do this? I'm currently
>>>> using
>>>> both ROOTBEER and COBRA for FROST data (and BOS banks for g8b).
>>>> Soon, I'm
>>>> going to have to pick a single framework for FROST.
>>>>
>>>> I'm sure that other people would like to use the kinematic fitter
>>>> under
>>>> ROOTBEER.
>>>>
>>>> Thanks for your time.
>>>>
>>>> -Michael
>>>>
>>>>
>>>
>>
>